Installation Manual

168 Using the iDRAC6 Directory Service
3 Configure the name of the group and the domain name on iDRAC6 using
either the Web-based interface or RACADM. For more information, see
"Configuring Microsoft Active Directory With Standard Schema Using the
iDRAC6 Web-Based Interface" on page 168 or "Configuring Microsoft
Active Directory With Standard Schema Using RACADM" on page 171.
Configuring Microsoft Active Directory With Standard Schema Using the
iDRAC6 Web-Based Interface
1 Open a supported Web browser window.
2 Log in to the iDRAC6 Web-based interface.
3 Go to iDRAC Settings  Network/Security tab  Directory Service tab 
Microsoft Active Directory .
4 Scroll to the bottom of the Active Directory Configuration and
Management
page, and click Configure Active Directory .
The
Active Directory Configuration and Management Step 1 of 4 page is
displayed.
5 Under Certificate Settings , select Enable Certificate Validation if you
want to validate the SSL certificate of your Active Directory servers;
otherwise, go to step 9
.
6 Under Upload Active Directory CA Certificate , browse to find the
certificate file.
7 C lick Upload .
The certificate information for the valid Active Directory CA certificate
is displayed.
8 (Optional: For AD authentication) Under Upload Kerberos Keytab , type
the path of the keytab file or browse to locate the file. Click
Upload . The
Kerberos keytab is uploaded into the iDRAC6.
9 Click Next . The Active Directory Configuration and Management Step 2
of 4
page is displayed.
10 Select Enable Active Directory .
11 Select Enable Single Sign-On if you want to log into iDRAC6 without
entering your domain user authentication credentials, such as user name
and password.