Installation Manual

Using the iDRAC6 Configuration Utility 307
• Write Protected - Displays whether the vFlash SD card is write-protected
or not.
•
Health - Displays the overall health of the vFlash SD card. This can be:
–OK
– Warning
–Critical
Press <Esc> to exit.
Smart Card Logon
Press <Enter> to select Enabled or Disabled. This option configures the
Smart Card Logon feature. The available options are Enabled, Disabled, and
Enabled with RACADM.
NOTE: When you select Enabled or Enabled with RACADM, IPMI Over LAN will be
switched off and blocked for editing.
System Services Configuration
System Services
Press <Enter> to select Enabled or Disabled. See the Dell Lifecycle
Controller User Guide available on the Dell Support Website at
dell.com/support/manuals for more information.
NOTE: Modifying this option will restart the server when you Save and Exit to apply
the new settings.
NOTE: If you choose to restore to factory defaults, the settings for System Services
does not change.
Cancel System Services
Press <Enter> to select No or Yes.
When you select Yes, all Unified Server Configurator sessions are closed and
the server is restarted when you Save and Exit to apply the new settings.