Installation Manual

356 Configuring Security Features
• SNMP agent (Table 22-9)
• Automated System Recovery Agent (Table 22-10)
Use the
Automated Systems Recovery Agent to enable the Last Crash
Screen
functionality of the iDRAC6.
NOTE: Server Administrator must be installed with its Auto Recovery feature
activated by setting the Action to either: Reboot System, Power Off System, or
Power Cycle System, for the Last Crash Screen to function in the iDRAC6.
4 Click Apply Changes to apply the Services page settings.
Table 22-4. Local Configuration Settings
Setting Description
Disable the iDRAC local
configuration using option
ROM
Disables local configuration of the iDRAC using
option ROM. The option ROM prompts you to
enter the setup module by pressing <Ctrl+E>
during system reboot.
Disable the iDRAC local
configuration using RACADM
Disables local configuration of the iDRAC using
local RACADM.
Table 22-5. Web Server Settings
Setting Description
Enabled Enables or disables the Web server. Checked=Enabled;
Unchecked=Disabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system.
Active Sessions The number of current sessions on the system, less than
or equal to the Max Sessions.
Timeout The time, in seconds, that a connection is allowed to
remain idle. The session is cancelled when the time-out is
reached. Changes to the timeout setting take affect
immediately and terminate the current Web interface
session. The Web server will also be reset. Please wait for
a few minutes before opening a new Web interface
session. The time-out range is 60 to 10800 seconds. The
default is 1800 seconds.