Installation Manual

64 Configuring the iDRAC6 Using the Web Interface
Accessing SSL Through the Web-Based Interface
1 Click iDRAC Settings  Network/Security .
2 Click SSL to open the SSL page.
Use the SSL page to perform one of the following options:
• Generate a Certificate Signing Request (CSR) to send to a CA.
The CSR information is stored on the iDRAC6 firmware.
• Upload a server certificate.
• View a server certificate.
Table 4-10 describes the above SSL page options.
Table 4-10. SSL Page Options
Field Description
Generate Certificate Signing
Request (CSR)
This option enables you to generate a CSR to
send to a CA to request a secure Web certificate.
NOTE: Each new CSR overwrites any previous CSR
on the firmware. The CSR in the firmware must
match the certificate returned from the CA.
Upload Server Certificate This option enables you to upload an existing
certificate that your company has title to and uses
to control access to the iDRAC6.
NOTE: Only X509, Base 64 encoded certificates are
accepted by theiDRAC6. DER-encoded certificates
are not accepted. Upload a new certificate to
replace the default certificate you received with
your iDRAC6.
View Server Certificate This option allows you to view an existing server
certificate.