Installation Manual

82 Configuring the iDRAC6 Using the Web Interface

Click Connect to connect to RFS. After successfully establishing the

connection, Connect is disabled.

NOTE: Even if you have configured remote file sharing, the GUI does not display

this information due to security reasons.

For remote file share, the remote RACADM command is:

racadm remoteimage.

racadm remoteimage <options>

Options are:

•

–c

; connect image

•

–d

; disconnect image

•

–u

; username to access the network share

•

–p

; password to access the network share

•

–l

<image_location>

; image location on the network share; use

double quotes around the location

•

–s

; display current status

NOTE: The maximum number of characters supported for User Name and

Password is 40 and for Image File Path it is 511. All characters including

alphanumeric and special characters are allowed for these three fields except the

following characters:

• ' (single quote)

• " (double quote)

• , (comma)

• < (less than)

• > (greater than)

Internal Dual SD Module

The Internal Dual SD Module (IDSDM) provides redundancy on the

hypervisor SD card by using another SD card that mirrors the first SD card

content. The second SD card can be set to IDSDM along with the other SD

card by setting the Redundancy option to Mirror mode in the Integrated