User's Manual

e2-Live Home Automation
Edit by Amos /20150810
9
How to operate the RP-20F control points individually
RP-20F support individual IR emission, following devices can be control individually.
RP-20 software, Need to be open by PC
RC-09 smart controller, provide three control type of whole region, point second, and point third
iTouch APPsoftware, provide whole region, point second, and point third
Individual IR control are related with RP-20 wiring and scenario editing actions, according to the
installation environment, make sure which device need to be individual control, and with the
matching use of hardware and software. The following, for the above-mentioned current e2-Live
system provide individual operator interface will be described.
Use the software of RP-20F (need to connect to PC)
Use RC-09 smart controller
1st press device, example , 2nd press , then all of the IR emit at the same time
1st press device, example , 2nd press , 3rd press , then point 1 of IR emit
1.Select
device
2. select
which
point of
IR need
to emit
3. press action button to
emit has been
selected point
Number 11
denote second
point of IR
Number 12 denote
thethird point of IR
emission