User's Manual

e2-Live Home Automation

Edit by Amos /20150810

Setting ID of iPower (PS-301 or PS-302)

RP-20 work together with iPower to make sure the devices’s power is ON or OFF. This special designed

is to solve bland power ON/OFF control on scenario mansging.

Perform this function, please plug your home appliances in smart socket of iPower. Use this page, you

can setting the location of remote control.

Note: This setting must work with our smart socket iPower, specify the selected button of iPower to get

into learning mode.

Press selected button of this setting page. Such as TV，CD，DVD….. iPower’s red LED will flash, it

means received your command and completed setting.

Use this

For setting ID code, please click the corresponding

button of appliances which was plugged into the iPower.r

Quick flash indicate successful ID setting

If tgere isn’t any flash display, please repeat steps 1~3

Press and hold this button

Poke a button in setting hole

LED solid red

(waite for setting ID code)

Setting button and indication of

LED

Use attached setting sticker or

paperclip for setting

There are 3 AC sockets can

beindividual control, and the

mechanical tact switch is

available

If you use this ID wrighting mode,

iPower will be set as not received

to remote control all power off,

please refer to the user menu of

iPower for other setting mode