User's Manual

e2-Live Home Automation

Edit by Amos /20150810

5. Repeat step 2~3 to continually to learn remote signal into RP-20

Situations of need to re-learn

1.After input IR signal, if

Please re-press the button of appliance IR signal

2. After input IR signal, when you hear of

Re-press a button of RC-09, then re-press the button of remote controller, if always fail, If the

learning has failed, please contact your dealer for help.

Press “Start learning” then you can select any one of the following devices to get into remote code

learning

Note: After you came into learning mode, if you don't action within 15 seconds, RP-20 will leave out the

learning mode.

Beep of buzzer: RP-20 will enable the button of Start Learn. Press again into learning mode once

more.

Buzzer

Short Bi three

times

Buzzert

One long, one short

LED

Red flash twice

Blue stable on

LED

Slowly flashing

blue LED ….

This faded

button means it

is in the status of

learning mode