User's Manual

e2-Live Home Automation

Edit by Amos /20150810

Point 2 ~ 7 are wired control

1. Appliances in Audio/Video cabinet tank:

IR signals cannot penetrate the veil, if the device is placed in the cabinet tank, IR emission

lines need to be extended to the cabinet in order to control

2. Devices are placed on the range of control

IR extension wire can help to solve the problem of IR emit signal been cut off by shelter.

3. If two same brand devices were placed in the same place, for example, the air-condition of living

room, master bedroom,

Learning IR signal of your air condition onto the button of A/C

Use top open IR to remote the air condition in the living room

Put point 1 wiring IR to reach your master bedroom to control your second air condition

If you want to control both of your air condition, you can use all emission output

RP-20 package provides two IR infrared emission lines, connect to appliances can be installed

according to the needs of the field wiring.

Packaging box with two IR

emission line, please let emitting

LED being positioned to front of

the receiver (attached

double-sided adhesive)

Position of the IR reception

2~7 ports of IR individual output