User's Manual

. • Do not expose to temperatures above 60
o
C (140
o
F).
. • Replace only with the battery pack designated for this product.
. • Recycle or dispose of used battery as stipulated by local regulation.
Check the battery power
• Tap the battery level icon ( ) on the Today screen.
• Select Start > Settings > System tab > Power.
Charge the battery
New batteries are shipped partially charged. Install and charge the battery before
use with this device. The full performance of a new battery is achieved only after
several complete charge and discharge cycles.To charge the battery:
. • Connect your device directly to an external power source.
. • Plug the device sync cable into the USB port on your PC.
Low battery
When the low-battery warning appears, following actions are suggested:
. • Immediately save your current data.
. • Recharge the battery.
. • Turn off the device.
1.4 Start Up
Turn the device on and off
To turn on the device, press the POWER button. When you turn on the device for
the first time, you are asked to complete a calibration process. For more
information, see “Calibrate the device” on page 18.
To turn off the device, press POWER again.
Note Press POWER key to turn off your device temporarily and switches the device to
sleep mode. However, messages and calls can still be received while the device is
in the sleep mode.
Calibrate the Device
Calibrating the device screen involves tapping with the stylus the centre of a cross as it
moves around the screen.
If the device does not accurately respond to screen taps, follow these steps to