User's Manual

Tips To reposition the keyboard, tap and hold the title bar, then drag to the desired
location. When no text is selected, you can also open the keyboard by doing the
gesture.
Edit text
1. In a program, draw a line across the text which is desired to edit.
2. After you lift the stylus from the screen, the line will disappear and the selected text
will be highlighted.
3. Do either of the following actions:
. • Rewrite the text.
. • Use gestures to capitalize letters, insert a space, and so on. For information
about using gestures, see “Transcriber Gestures” in this chapter.
Transcriber Gestures
Use quick strokes of the stylus to edit your text or to insert returns, spaces, or tabs.
Tip Enter, Space, and Backspace buttons can also be used with the Transcriber
toolbar.
Do To
Insert a paragraph return at the cursor. The horizontal portion of the gesture must
be at least two times longer than the vertical portion.
Insert a space at the cursor. The horizontal portion of the gesture must be at least
two times longer than the vertical portion.
Move the cursor one space back and erase any text. Do the gesture by drawing a
line from right to left.
Open the menu of alternate words if a word is selected or the onscreen Transcriber
keyboard if no text is selected. Do the gesture by drawing a line straight down and
back up.
Change the capitalization of a selected letter, word, or block of text. Do the gesture
by drawing a line straight up.
Undo the last action. Do the gesture by drawing a line straight up and back down.
Copy the selected text. Do the gesture by drawing a line from left to right and back.
Cut the selected text. Do the gesture by drawing a line from right to left and back.
Paste copied or cut text. Do the gesture by drawing a line from the lower left of the
screen diagonally up toward the right and back down to the right.