User's Manual

6. Tap Finish.

4.3 Synchronize via Infrared and Bluetooth

You can connect your device to the PC to synchronize using the local wireless

technologies, such as infrared (IR) and Bluetooth. These technologies have almost

similar but slightly differing requirements.

Synchronize with a PC via infrared

1. Follow the instructions in ActiveSync Help on the PC for setting up your PC to receive

infrared beams.

2. Line up the infrared (IR) ports according to the instructions in the manufacturer’s

documentation for your device so that they are unobstructed and within close range.

3. On the device, tap Start > Programs > ActiveSync.

4. Tap Menu > Connect via IR.

5. Tap Sync.

Synchronize with a PC via Bluetooth

1. Follow the instructions in ActiveSync Help on the PC for

conﬁguring Bluetooth on your PC to support ActiveSync.

2. On the device, tap Start > Programs > ActiveSync.

3. Tap Menu > Connect via Bluetooth. Make sure that Bluetooth is turned on at the

device and the PC, and that they are within close range.

4. If this is the ﬁrst time you have connected to this PC via Bluetooth, you must ﬁrst

complete the Bluetooth wizard on the device and set up a Bluetooth partnership between

your device and the PC.

For more information about enabling and configuring Bluetooth, see Chapter 6.

Note You can also use the Sync Setup Wizard to set up the device to synchronize

remotely with Exchange Server. This wizard is started when you connect your

mobile device to your PC after installing ActiveSync on the PC.

4.4 Synchronize Music, Video, and Pictures

If you want to carry your music or other digital media along with you along while you

travel, ActiveSync works with Windows Media Player to synchronize music, video,

and pictures with your device.

Other than selecting the Media information type in ActiveSync to be synchronized,

all media synchronization settings must be set in Windows Media Player. Before

media can be synchronized, following action should be taken:

. • Install Windows Media Player Version 10 on the PC.

. • Connect your device to the PC with a USB cable. If the device is currently

connected using Bluetooth or infrared, you must end that connection before media can

be synchronized.

. • Insert a storage card into your device (32MB or larger is recommended).

. • Set up a sync partnership between the storage card and Windows Media

Player.