User's Manual

Exit the Camera
• Tap the exit icon ( ).
Use the camera
The camera on your device allows you to capture pictures and video clips by using
various built-in modes with flexibility. The Camera mode is set to the Photo capture
mode by default. By using either the navigation keys or tapping the screen you can
adjust the various options.
• Tap or on the screen.
. • Press NAVIGATION left or right.
. • Photo: Capture standard still images.
. • Video: Capture video clips, with or without accompanying audio.
. • Portrait: Capture self portraits
. • Self Shutter: Capture a still image
. • Burst: Capture a sequence of still images (maximum 30) as long as CAMERA
on the device or ENTER on the NAVIGATION is kept being pressed.
Use shortcuts in Camera mode
While in Camera mode, use the following buttons and icons on your device as a shortcut
when performing operations.
The ENTER button
Press ENTER to take a picture when capture still image. Press ENTER to start
recording an incoming video stream; press it again to stop recording.
The NAVIGATION control
. • Press NAVIGATION up or down to increase or decrease the zoom level.
. • Press NAVIGATION left or right to select the previous or next sequential
capture mode.
The CAMERA button
Press the CAMERA button on the device to switch to Camera mode. If already in
Camera mode, press the button once to take a still image or start recording a video clip.
Use Still Image capture modes
While using Still Image capture modes, such as Photo, Self Portrait, Self Shutter, and
Burst, you can capture still image(s) by pressing CAMERA on the device or ENTER on
the NAVIGATION control. The Still Image could be captured as JPEG format.
While capturing an image in the Picture Theme capture mode, you can select a built-in
template from the default template folder. To browse and select different templates, tap
the template selector icon or tool icon to select one from the Camera Settings screen.
Use Video capture mode
While using the Video capture mode, you can press CAMERA or ENTER to start
recording a video clip (with audio if desired). To stop recording, press CAMERA or
ENTER again. Your device will display the first frame of the captured video clip by
default on the Review screen.