User's Manual

User Manual Page 21 of 66
Your phone allows you to engage in a conference call so you can talk to a maximum of five other parties at
the same time.
To make a conference call:
1. Dial the number of the first participant in the normal way.
2. Press [LSK] and select Phone Book or New Call to dial the phone number of the second party. The
first call is automatically put on hold.
3. When the second call is established, press [LSK] and select “Conference.” This joins the first
participant into the conference call.
4. To add more participants, repeat steps 2 and 3, then select Add to Conference.
Note: The conference call feature is a network service. Check with your network operator if this service
is supported.
 Private Conversation During Conference Call
1. During a conference call, press [LSK] and select “Conference List”;
2. Select one or more participants who you want to talk privately.
3. Press [LSK] to select “Split.” This will put the conference call on hold while you talk to the selected
participants. The remaining participants can talk still continue talking to each other.
4. Press [LSK] and select “Conference” to return to the conference call.
5. To drop a participant from the conference call, press [LSK] and select “Conference List” and then select
“End.”
6. Press ‘End” to terminate the conference call
Note: Do not hold the device near your ear when the loudspeaker is in use, because the volume may be
extremely loud.
2.7 In-Call Options (Video Call)
Note: Video phone feature is only available in UMTS network. Only the Primary SIM of the phone
supports Video Call.
 Front camera/Rear camera
The phone has two camera lens, one in front and the other at the rear. During a Video Call, press [LSK] to
enter the Video In-Call menu to select “Front camera” or “Rear camera” to send video to the other party.
 SMS