User's Manual

Flying Angel 3G Wireless Data Card
User Manual
22 Updated 03/2009
Fig. 4.1-8
4.2 Using the Flying Angel 3G Wireless Data Card -
PC
Make sure the Flying Angel 3G Wireless Data Card is connected to a USB port on
your PC, and the modem software and drivers are installed as outlined in Section
4.1, above.
When the Flying Angel is properly connected, your PC detects the modem and displays a
startup menu in a pop-up window. This startup menu offers you shortcuts to a set of
standard modem actions as shown below (figure 4.2-1, table 4.2-2):