User's Manual

Flying Angel 3G Wireless Data Card

User Manual

49 Updated 03/2009

Name displayed

You may customize the way the name of your device appears in Flying Angel Connection

Manager as shown below in figure Fig. 4.2-24:

x Click on [HSUPA Modem], which is the factory-default name given to the

device.

x In the Name Displayed field, enter your preferred device name.

x Click [OK] to confirm your update, and your new device name will appear

in the Settings menu.

Fig. 4.2-24

Change SIM Card settings

Flying Angel Connection Manager also enables you to change settings for your SIM card

using Flying Angel Connection Manager:

Enable/disable PIN code

Note: Need more info to edit this. Do the SIM cards have an original PIN code

that you need to do this, or are you setting up one for the first time?

You can set SIM PIN code status as Disable or Enable, and when you change

settings, you must input correct PIN code first. If you set SIM PIN code as Enable,

every time Flying Angel is detected, you will be asked for inputting SIM PIN code

first.