User's Manual

Flying Angel 3G Wireless Data Card
User Manual
51 Updated 03/2009
Chapter 5 Installation and Software –
Macintosh
5.1 Install Connection Software
The Flying Angel 3G Wireless Data Card comes with the following software which will
allow you to connect to the internet, establish modem settings, and manage your data:
x Flying Angel Connection Manager software for Macintosh
x Driver software to interface between the Flying Angel 3G Wireless Data Card and
your computer’s operating system.
The first time the Flying Angel 3G Wireless Data Card is inserted in a USB slot in your
computer, you will be guided through the following steps to automatically install the
Connection Manager software and drivers.

1. Connect the Flying Angel 3G Wireless Data Card to Your PC (See Chapter 3.)
2. The Flying Angel Connection Manager Welcome screen will appear (see figure 5.1-1).
Select [Continue] to continue with the installation.
Fig. 5.1-1
3. The installation guide will automatically designate “Macintosh HD” as the location for
the Standard Installation. To install to the suggested folder, click [Install]. (Figure
5.1-2)