User's Manual

KIP User Manual

4.5 Security setup

4.5.1 SIM lock

This function can prevent others from using your SIM card without

your permission. After the SIM card PIN code is activated, correct PIN

code must be input every time when the mobile phone is powered on;

otherwise you can only make emergency call.

Note:

PIN code is the operating password and relative with the

SIM card. The SIM card will be locked, if the PIN code is

wrong for 3 consecutive times. At this time, you need the

PUK code to unlock the SIM card. The PUK code may be

provided for you together with the PIN code and the SIM

card. If not, please contact your network provider.

4.5.2 Phone lock

This function is to lock the phone and prevent other people from

using the mobile phone without permission (default password is 0000).

After enable the phone lock, you must input the correct password every

time powering on the mobile phone, unless the mobile phone can not be

used normally.

4.5.3 Auto keypad lock

After this function is activated, when the phone is in standby status

and without any operation, the keypad will be locked automatically after

the set time. Then the standby interface will show keypad locked icon at

the bottom, you should slide the block to unlock the keypad.

4.5.4 Fixed dial

After the function is activated, the mobile phone is only allowed to be

used to dial the telephone numbers existing in the list. To turn on the

function, you need to input your PIN2 code. Please consult your network

service provider for specific situations.

Note:

When Fixed dial function is active, some functions of SIM

card will be restricted, such as dial call, send text message,

and send multimedia message and so on.

4.5.5 Barred dial

This function needs to be supported by SIM card. Please consult

your network service provider for specific situations.