BEDIENUNGSANLEITUNG MODE D'EMPLOI OPERATING INSTRUCTIONS TL-22LC883 LCD FARBFERNSEHGERÄT LCD TELEVISEUR EN COULEUR LCD COLOR TELEVISION
Inhalt Inhalt der Verpackungseinheit ................................ 2 Funktionen .............................................................. 2 Einleitung ................................................................ 2 Vorbereitung ........................................................... 2 Sicherheitsvorkehrungen ........................................ 3 Stromquelle......................................................... 3 Netzkabel ............................................................
Inhalt der Verpackungseinheit Einleitung EPG LANG ABC SUBTITLE GHI DEF 1 2 3 JKL MNO PQR 4 5 6 STU VWX YZ 7 FAV Wir danken Ihnen für den Kauf dieses Produkts. Dieses Handbuch führt Sie in die richtige Bedienung Ihres TV-Geräts ein. Bitte lesen Sie dieses Handbuch sorgfältig durch, bevor Sie das TV-Gerät in Betrieb nehmen. SLEEP LCD-TV 9 8 0 TV DTV V Bewahren Sie dieses Handbuch zur künftigen Verwendung sicher auf.
sollten diese Öffnungen niemals blockiert oder abgedeckt werden. Sicherheitsvorkehrungen Lesen Sie bitte zu Ihrer eigenen Sicherheit die folgenden Sicherheitshinweise sorgfältig durch. Stromquelle Das Gerät darf nur an einer Netzsteckdose mit 220240 V Wechselspannung und einer Frequenz von 50 Hz betrieben werden. Stellen Sie sicher, dass Sie die richtige Spannung auswählen. Netzkabel Stellen Sie keine Gegenstände auf das Netzkabel (weder das Gerät selbst, noch Möbel usw.
Informationen über die Entsorgung von Altgeräten und Batterien [nur für die Europäische Union] Diese Symbole zeigen an, dass das elektrische oder elektronische Gerät am Ende seiner Nutzungsdauer nicht als normaler Haushaltsmüll entsorgt werden darf. Wenn Sie dieses Produkt oder Batterien entsorgen wollen, beachten Sie bitte die Sammelsysteme und –einrichtungen für die entsprechende Wiederverwertung.
Übersicht über die Fernbedienung 1. Standby 2. Gelbe / Menü funktion / Aktuelle sprache (*) (im DTV-Modus) 3. Blau / Menü Installation / Favoritemode (*) (im DTV modus) 4. Keine Funktion 5. Elektronischer Programmführer (im DTVModus) EPG 6. Ausschalttimer SCREEN 7. Untertitel (im DTV-Modus) / TXT Untertitel (analoger TV-Modus) 12. AV / Quelle SLEEP GHI DEF 1 2 3 JKL MNO PQR 6 4 5 STU VWX YZ 7 8 9 FAV 0 10. Lautstärke + 11.
LCD-TV und Bedientasten VORDER- und RÜCKANSICHT SEITENANSICHT Steuertasten 1. Taste Nach oben 2. Taste Nach unten 3. Programm / Lautstärke / AVAuswahltaste 4. Standby- / Ein-Taste Hinweis:Sie können die Tasten “+/-” verwenden, um die Lautstärke zu verändern. Wenn Sie den Kanal wechseln wollen, drücken Sie einmal die Taste P/V/AV und dann die Tasten “+/-”. Wenn Sie die Taste P/V/AV einige Sekunden gedrückt halten, wird die Quellen-OSD eingeblendet.
Ansicht der Anschlüsse – Anschlüsse an der Seite 1. Der CI-Steckplatz dient zum Einsetzen einer CI-Karte. Mit einer CI-Karte können Sie alle Kanäle sehen, die Sie abonniert haben. Weitere Informationen finden Sie im Abschnitt “Conditional Access” 2. USB-EINGANG (funktioniert nur im DTV-Modus) 3. Der Videoeingang wird zum Anschließen des Videosignals von Zusatzgeräten verwendet. Schließen Sie das Videokabel zwischen der Buchse VIDEO IN des TV-Geräts und der Buchse VIDEO OUT des Zusatzgeräts an. 4.
Anschließen des LCD-TVs an einen PC HDMI 1 Zur Anzeige des Computerbilds auf Ihrem LCD-TV können Sie dieses an einen Computer anschließen. • Schalten Sie Computer und TV-Gerät aus, bevor Sie die Anschlüsse vornehmen. • Verwenden Sie ein 15-poliges D-Sub-Monitorkabel, um einen PC an das LCD-TV anzuschließen. Verwenden Sie ein Audiokabel zwischen den Audioeingängen des TV-Geräts (an der Seite) und dem Audioausgang Ihres PCs, um die Audioverbindung zu ermöglichen.
Anschluss eines DVD-Players Wenn Sie einen DVD-Player an Ihr LCD-TVGerät anschließen möchten, können Sie dafür die Anschlüsse des TV-Geräts verwenden. DVD-Player können verschiedene Anschlüsse aufweisen. Bitte sehen Sie im Handbuch Ihres DVD-Players für weiterführende Informationen nach. Schalten Sie das TV-Gerät und das Zusatzgerät aus, bevor Sie die Anschlüsse vornehmen. Hinweis: Die in der Abbildung gezeigten Kabel sind nicht im Lieferumfang enthalten.
Einlegen der Batterien in die Fernbedienung • Entfernen Sie die Batteriefachabdeckung auf der Rückseite der Fernbedienung, indem Sie den markierten Teil leicht nach oben drücken. • Legen Sie zwei Batterien vom Typ AAA/R3 oder einem gleichwertigen Typ ein. Achten Sie beim Einlegen der Batterien auf die richtige Polung (+/-) und setzen Sie den Batteriefachdeckel wieder ein. Eingangsauswahl Wenn Sie externe Geräte an Ihr TV angeschlossen haben, können Sie dieses auf unterschiedliche Eingabequellen schalten.
AV-Modus • Halten Sie die Taste “P/V/AV” einige Sekunden lang gedrückt. Die Quellen-OSD wird eingeblendet. Wählen Sie die gewünschte Quelle mit den Tasten “+/-” aus. Hinweis: Das OSD-Menü für die Länderauswahl ist in UK nicht verfügbar. Drücken Sie die Taste OK auf der Fernbedienung, um fortzufahren.
GELBE Taste (Vorherg. Tag) : Tag zeigt die Programme des vorhergehenden Tags an. Allgemeine Bedienung Wenn Sie während des laufenden Betriebs auf die Taste “TV/DTV” drücken, schaltet das TV-Gerät zwischen den digitalen terrestrischen und den analogen Sendern hin und her. Informationszeile • Wann immer Sie über die Tasten P- / P+ oder die Zifferntasten den Kanal ändern, wird das Kanalbild zusammen mit einer Informationszeile am unteren Ende des Bildschirms angezeigt (nur im DTV-Modus verfügbar).
Folgen Sie den Anweisungen, die auf dem Bildschirm des digitalen Teletexts angezeigt werden. • Wenn der Hinweis Drücken Sie die Taste “OK” oder eine ähnlich lautende Meldung erscheint, drücken Sie die Taste OK. • Wenn Sie die Taste “ ” drücken, schaltet das TVGerät auf normalen Fernsehbetrieb zurück. • Bei einer digitalen, terrestrischen Sendung (DVB-T) verfügen Sie neben Kanälen, die digitalen Teletext und normales Fernsehbild beinhalten, auch solche, die nur digitalen Teletext ausstrahlen.
Hinweis: Wenn Sie die Programmnummer des Kanals, den Sie verschieben wollen, eingeben, erscheint die Meldung “....Kanaldienste werden ersetzt. Wollen Sie fortsetzen?” als OSD-Anzeige. Drücken Sie OK zur Bestätigung oder “Nein” zum Abbrechen des Vorganges. Löschen von Kanälen in der Kanalliste • Drücken Sie die Taste “ ” oder “ ”, um einen Kanal auszuwählen, der gelöscht werden soll. • Drücken Sie die Tasten “ ” oder “ ”, um im Kanallisten-Menü die Option “Löschen” auszuwählen.
Favoritenliste bearbeiten (Edit Favorite Lists) wird eingeblendet. Um das Timerfenster einzublenden, aktivieren Sie diese Option im Hauptmenü. Um einen Timer hinzuzufügen, drücken Sie die Taste GELB auf der Fernbedienung. Das Fenster “Timer hinzufügen” wird eingeblendet. Modus: Wählt den Kanallistenmodus aus. Kanal: Mit den Tasten “ ” oder “ ” können Sie durch die TV- oder Radioliste navigieren. Datum: Das Beginndatum wird über die Tasten Links/ Rechts und die Zifferntasten eingegeben.
• Um die Vertragsinformationen anzusehen: Rufen Sie IDTV auf; drücken Sie die Taste “M”, markieren Sie die Option Conditional Access und drücken Sie die Taste “OK”. • Wenn kein Modul eingesetzt ist, erscheint der Hinweis: “Es konnte kein Conditional Access-Modul gefunden werden”. • Weitere Informationen über die Einstellungen finden Sie in der Bedienungsanleitung des Moduls. Hinweis: Sie dürfen das CI-Modul nur einsetzen oder entfernen, wenn das TV-Gerät im STANDBY-Modus oder vom Netz getrennt ist.
sind. Beachten Sie, dass diese Einstellung nicht veränderbar ist. Stellen Sie sicher, dass das TV-Gerät im Standby-Modus ist. Das TV-Gerät wird automatisch täglich um 3 Uhr morgens hochgefahren und sucht dann nach neuen Informationen, die eventuell übertragen werden, und lädt diese automatisch auf Ihren Receiver herunter. Dieser Vorgang dauert normalerweise etwa 30 Minuten. Minuten Hinweis: Nach einem OAD-Update kann das TV-Gerät unter Umständen im Erstinstallationsmodus starten.
• Damit die Untertitel richtig angezeigt werden, verwenden Sie bitte diese Einstellung, um eine DivX-Untertitelsprache auszuwählen. • Wählen Sie die gewünschte Sprachoption durch Drücken der Taste “ ” oder “ ” aus. • Guide: Ändern Sie durch Drücken der Tasten “ ” oder “ ” die EPG-Sprache. Bildbeschreibung (optional) Mit dieser Einstellung können Sie die Bildbeschreibung aktivieren oder deaktivieren, indem Sie die Tasten “ ” oder “ ” drücken.
In diesem Menü sind folgende Symbole enthalten: (*) Für Dänemark, Schweden, Norwegen oder Finnland. Automatische Kanalsuche Die Automatische Suche wird gestartet, wenn die Taste “OK” gedrückt wird, während die Option Automatische Kanalsuche Automatische Kanalsuche (Automatic Channel Scan) markiert ist. Auf dem Bildschirm wird folgender Hinweis eingeblendet: Markieren Sie über die Tasten “ ” oder “ ” Ja oder Nein, und drücken Sie zur Bestätigung die Taste “OK”.
Durch Auswählen von JA (YES) und Drücken der Taste “OK” wird die bestehende Kanaltabelle gelöscht. Nach dem Laden der Werkseinstellungen wird das Menü “Erstinstallation” angezeigt. Das Menü für die Sprachauswahl erscheint als erstes auf dem Bildschirm. Wählen Sie über die Tasten “ ” oder “ ” die gewünschte Sprachoption und aktivieren Sie sie mit der Taste OK. • Sie können die Musik-, Bild- und Video-Dateien von einem USB-Speicherstick wiedergeben.
Ansehen von JPEG-Dateien Videowiedergabe W i e d e r g a b e ( Ta s t e R o t ) : S t a r t e t d i e Videowiedergabe. Stop (Taste Blau) : Stoppt die Videowiedergabe. Pause (Taste OK) : Pausiert die Videowiedergabe. Rücklauf (Cursor nach links) : Startet den Rücklauf. Springen (Zifferntasten): springt zur Datei, die über die Zifferntasten ausgewählt wird. OK: zeigt das ausgewählte Bild im Vollbildmodus an. Wiedergabe / Diaschau (Taste Grün) : startet die Slideshow mit allen Dateien im Ordner.
Kontrast/Helligkeit/Schärfe/Farbe/Farbton Menü Ton Drücken Sie die Taste “ ” oder “ ”, um die gewünschte Option auszuwählen. Drücken Sie die Tasten “ ” oder “ ”, um den Wert einzustellen. Hinweis: Die Option Farbton ist nur sichtbar, wenn das TVGerät ein NTSC-Signal empfängt. Farbtemperatur D r ü c k e n S i e d i e Ta s t e “ ” o d e r “ ” , u m Farbtemperatur auszuwählen. Drücken Sie die Taste “ ” oder “ ”, um eine der folgenden Optionen auszuwählen: Normal ,Warm und Kühl.
Kopfhörer stummschalten Wählen Sie die Option Kopfhörer mit den Tasten “ ” oder “ ” aus. Drücken Sie die Taste “ ” oder “ ”, um Kopfhörer stummschalten auf Ein oder Aus zu stellen. Wenn Sie den Kopfhörerton stummschalten wollen, ändern Sie bitte die Funktion Kopfhörer stummschalten auf Ein. Sie können diese Funktion auch benutzen, um bei abgestelltem TV-Ton den Kopfhörerton ein- oder auszuschalten. Audiomodus Wählen Sie die Option Audiomodus mit den Tasten “ ” oder “ ” aus.
Teletext-Sprache Drücken Sie die Taste “ ” oder “ ”, um TeletextSprache auszuwählen. Stellen Sie über die Taste “ ” oder “ ” die Teletext-Sprache auf West, Ost, Kyrillisch, Griechenland-Türkei, Arabisch oder Persisch ein. Ext. Ausgang Wählen Sie die Option Ext. Ausgang mit den Tasten “ ” oder “ ” aus. Drücken Sie die Taste “ ” oder “ ”, um Ext. Ausgang auf Ein oder Aus zu stellen. Sie die Taste AV / Source auf der Fernbedienung drücken.
Suche (Search) Löschen (Delete) Wählen Sie die Option Suchlauf mit den Tasten “ ” oder “ ” aus. Drücken Sie die Taste “ ” oder “ ”, um die Programmsuche zu starten. Sie können auch die gewünschte Frequenz über die Zifferntasten eingeben, wenn die Suchoption markiert ist. Drücken Sie die Taste GELB, um ein bestehendes Programm zu löschen. Wenn Sie die Taste GELB nun nochmals drücken, wird das ausgewählte Programm aus der Programmliste gelöscht und die anderen Programme rücken entsprechend nach oben.
Phase Menüsystem im PC-VGA Modus Lesen Sie den Abschnitt “Anschließen des LCDTVs an einen PC” für den Anschluss eines PCs an das TV-Gerät. Um auf die Quelle PC-VGA zu schalten, drücken Sie die Taste “SOURCE” auf der Fernbedienung und wählen Sie PC-VGA als Eingang. Sie können auch das Menü “Quelle” verwenden, um zum PC-VGA -Modus zu schalten. Hinweis: Diese Einstellungen für den PC-VGA-Modus sind nur verfügbar, wenn das TV-Gerät auf die Quelle PC-VGA geschaltet ist.
Stummschalten der Lautsprecher Die Lautsprecher werden nicht stummgeschaltet, wenn die Kopfhörer angesteckt werden. Wenn Sie die Lautsprecher stummschalten möchten, solange Sie die Kopfhörer benutzen, drücken Sie die Taste “Stummschaltung”. Das Symbol wird auf dem Bildschirm eingeblendet und erlischt nach einigen Sekunden wieder. Bitte beachten Sie, dass die Stummschaltungsfunktion deaktiviert und die Lautsprecher wieder eingeschaltet werden, wenn Sie die Lautstärke des TV-Geräts verändern.
Farbtasten Sie können die Farbtasten je nach den angezeigten Funktionen einsetzen. Ist das TOPTEXT-System verfügbar, werden die Abschnitte einer Teletextseite farbcodiert und können dann durch Drücken der entsprechenden Farbtaste ausgewählt werden. Drücken Sie eine Farbtaste je nach Wunsch. Es erscheint farbiger Text, der Ihnen anzeigt, welche Farbtasten Sie verwenden können, wenn FASTEXT verfügbar ist.
Anhang A: Typische Anzeigemodi PC-Eingang Das Display hat eine maximale Auflösung von 1920 X 1080. Die folgende Tabelle illustriert einige der typischen Anzeigemodi. Unter Umständen unterstützt Ihr TV keine verschiedenen Auflösungen. Die unterstützten Auflösungen werden unten aufgelistet. Wenn Sie Ihren PC mit einer nicht unterstützten Auflösung betreiben, erscheint eine Warnmeldung am Bildschirm. Auflösung Index Frequenz Hor Ver Ver (Hz) Hor (KHz) Standard 1 640 480 60 31.
Anhang B: AV- und HDMI-Signalkompatibilität (Eingangssignaltypen) Quelle EXT-1 (SCART) FAV YPbPr HDMI-1 Unterstützte Signale Verfügbar PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 24Hz X 1080
Anhang C: Im USB-Modus unterstützte Dateiformate Medium Dateierweiterung .mpg/ .dat/ .vob .mpeg Film.avi Musik Format Hinweise Video Audio MPEG1 MPEG Layer 1/2/3 (Max. Auflösung / Bitrate etc.) MPEG2 MPEG2 XviD/ 3ivx PCM/MP3/ WMA XviD-Version bis: 1.1.2 MPEG4 PCM/MP3/ WMA Unterstützt ASP (GMC-Warppunkte unterstützen nur 1) MS ISO MPEG4 PCM/MP3/ WMA SP und ASP unterstützt PCM Sample Rate: 8K ~ 48KHz - MPEG 1/2 .
Technische Daten TV-ÜBERTRAGUNG PAL/SECAM B/G D/K K’ I/I’ L/L’ EMPFANGSKANÄLE VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 Engine, erfüllt ISO / IEC 13522-5 UK Engine Profile 1 Object carousel-Support erfüllt ISO/IEC 135818-6 und UK DTT-Profil. Frequenzbereich : 474-850 MHz für UK-Modelle Digitaler Empfang 170-862 MHz für EU-Modelle Übertragungsstandards: DVB-T, MPEG2 Demodulation: COFDM mit 2K/8K FFT-Modus. FEC: alle DVB-Modi Video: MP@ML, PAL, 4:3/16:9 Audio: MPEG Layer I&II 32/44.148kHz.
Table des matières Contenu du carton ................................................ 34 Caractéristiques.................................................... 34 Introduction ........................................................... 34 Préparation ........................................................... 34 Précautions de sécurité ........................................ 35 Source d’alimentation ....................................... 35 Cordon d’alimentation .......................................
• PLL (Recherche de fréquence). • Entrée PC. • Plug&Play (branchement et utilisation instantanée) pour Windows 98, ME, 2000, XP, Vista. • Mode jeu Contenu du carton Introduction EPG LANG ABC SUBTITLE SLEEP 2 3 MNO PQR 4 5 6 STU VWX YZ 1 JKL 7 FAV Merci d’avoir choisi cet appareil. Ce manuel vous guidera pour une utilisation appropriée de votre téléviseur. Lisez-le minutieusement avant de procéder à l’utilisation de votre appareil.
Chaleur et flammes Précautions de sécurité Lisez les consignes de sécurité recommandées ci-après pour votre sécurité. Source d’alimentation Ce téléviseur ne doit fonctionner qu’à partir d’une prise de courant 220-240 V AC 50 Hz. Assurez-vous de sélectionner la tension appropriée pour votre convenance. Cordon d’alimentation Ne placez pas l’appareil, ni une pièce de mobilier, etc. sur le cordon d’alimentation (alimentation secteur); évitez tout pincement du cordon.
Informations applicables aux utilisateurs concernant la mise au rebut de l’ancien appareil et des piles [seulement Union européenne] Ce symbole indique que l’équipement ne doit pas être éliminé comme un déchet domestique. Si vous devez éliminer le poste ou les piles, veuillez considérer les systèmes ou infrastructures de collecte pour un recyclage approprié. Pour plus d’information, veuillez contacter les autorités locales ou le distributeur chez qui vous avez acheté l’article.
Vue d’ensemble de la télécommande 1. Veille 2. Jaune (Menu fonction) / Langue en cours (*) (en mode DTV) 3. Bleu / Menu Installation / Mode favori (*) (en mode DTV) 4. Aucune fonction 5. Guide de programme électronique (en mode DTV) EPG 6. Minuteur de mise en veille SCREEN LANG 7. Sous-titre (en mode DTV) / Sous-titre TXT (Mode TV analogique) 8. Touches numériques 9. TV / Mode TV numérique 12. AV / Sélection de la Source SLEEP GHI ABC DEF 1 2 3 JKL MNO PQR 6 10. Hausser le Volume 11.
TV LCD et boutons de commande VUE AVANT et ARRIÈRE VUE LATÉRALE Boutons de contrôle 1. Up button (Bouton Haut) 2. Down button (Bouton Bas) 3. Bouton Programme/Volume / Sélection AV 4. Bouton Veille / Marche Remarque: vous pouvez utiliser les touches “+/-” pour hausser ou baisser le volume. Pour changer de chaîne, appuyez une fois sur la touche P/V/ AV, puis utilisez les touches “+/-”. Si vous maintenez la touche P/V/AV enfoncée pendant quelques secondes, le menu source restera affiché à l’écran.
Affichage des branchements - Connecteurs latéraux 1. La fente CI sert à insérer une carte CI. Une carte CI vous permet de regarder toutes les chaînes auxquelles vous êtes abonné(e). Pour plus d’informations, référez-vous à la section « Accès conditionnel » 2. Entrée USB (ne fonctionne qu’en mode DTV) 3. L’entrée vidéo est utilisée pour connecter les signaux vidéo des périphériques externes. Branchez le câble vidéo entre l’ENTREE S-VIDEO du téléviseur et la SORTIE S-Vidéo de votre appareil. 4.
Connexion du téléviseur LCD à un PC VGA SPDIF Coax.OUT SCART Entrées audio Câble audio de PC (non fourni) sur les ENTREES AUDIO du téléviseur Entrée PC Câble RGB du PC (non fourni) à l'entrée du PC • Vous pouvez brancher les périphériques USB à votre téléviseur à l’aide de l’entrée USB du téléviseur. Cette fonctionnalité vous donne la possibilité d’afficher/de lire les fichiers musicaux, photographiques ou vidéos enregistrés sur un support USB.
Connexion du téléviseur à un lecteur de DVD Si vous voulez brancher un lecteur de DVD à votre téléviseur LCD, vous pouvez utiliser les branchements qui se trouvent sur le téléviseur. Les lecteurs de DVD peuvent disposer de différentes prises. Veuillez consulter le manuel d’utilisation de votre lecteur de DVD pour plus d’informations. Débranchez le téléviseur et l’appareil avant d’effectuer les branchements. Remarque: Les câbles présentés dans l’illustration ne sont pas fournis.
Insertion des piles dans la télécommande Sélection d’entrée • Retirez le couvercle du compartiment des piles situ. • Insérer à l’intérieur deux piles de type AAA/R3 ou équivalent . Respectez la bonne polarité (+/-) pendant l’insertion des piles et replacez le couvercle du compartiment des piles à la fin de l’opération. Une fois les équipements externes connectés à votre téléviseur, vous pouvez commuter entre différentes sources d’entrée.
Mode AV • Maintenez la touche “P/V/AV” pour faire afficher le menu source. Utilisez les touches “+/-” pour sélectionner la source souhaitée. Pressez le bouton OK sur la télécommande pour continuer et le message suivant s’affichera à l’écran: Utilisation des touches de la télécommande • La télécommande de votre téléviseur est conçue pour contrôler toutes les fonctions du modèle sélectionné. Les fonctions seront décrites conformément au système de menu de votre téléviseur.
Fonctionnement général Presser le bouton «TV/DTV» à tout moment lorsque vous regardez des programmes de télévision fera basculer la TV entre la diffusion terrestre numérique et sa diffusion analogique normale. Bandeau d’information • Chaque fois que vous changez de chaîne en utilisant le bouton P - / P + ou les boutons numériques, la TV affiche l’image de l’émission en même temps qu’un bandeau d’information en bas de l’écran (disponible uniquement en mode DTV).
• Quand la touche Press “OK” (Appuyez sur sélectionner) ou un message similaire apparaît, appuyez sur le bouton OK. • Quand le bouton “ ” est pressé, la TV revient à la diffusion télévisée. • Avec la diffusion numérique terrestre (DVB-T), en plus de la diffusion télétexte numérique et de la diffusion normale, il existe également des chaînes avec seulement de la diffusion télétexte numérique.
L’OSD ci-après s’affichera tout près de la touche “OK” pour vous demander de saisir un numéro en utilisant les touches numériques de la télécommande et d’appuyer sur “OK” pour confirmer. Remarque: Si vous saisissez le même numéro de chaîne que vous voulez déplacer, “…les services de chaîne seront déplacés. Voulez vous continuer?” Le menu à l’écran s’affichera. Appuyez sur OK pour confirmer ou sélectionnez « Non » pour annuler.
Réglage des chaînes favorites Minuteries Pour définir une chaîne favorite, placez en surbrillance la rubrique « Favorites » en bas du menu de la liste des chaînes. Ensuite, appuyez sur le bouton “OK”, et le menu Modifier préférées apparaît à l’écran. Pour afficher la fenêtre des minuteries, activez l’élément à partir du menu principal. Pour ajouter une minuterie, appuyez sur le bouton JAUNE de la télécommande. La fenêtre « Ajouter un minuteur » s’affiche alors.
• Le CAM doit être correctement inséré; il est impossible de l’insérer entièrement s’il est inversé. Vous pouvez endommager le CAM ou le terminal TV si le premier est inséré avec une certaine pression. • Branchez le téléviseur à la prise de courant, allumez et attendez quelques instants jusqu’à ce que la carte soit activée. • Certains modules CAM peuvent nécessiter le réglage suivant. Réglez le CAM en entrant dans le menu DTV, sélectionnez Accès conditionnel (Conditional Access) et appuyez sur “OK”.
faites passer l’option Veille à l’option Désactivé, cette fonction ne sera pas disponible. Pour utiliser l’option de recherche en mode de veille, veuillez vous assurer d’avoir activé l’option Recherche en mode de veille. Mise à niveau du récepteur Téléchargement hertzien (OAD) Cette option vous aide à conserver la mise à jour de votre téléviseur. Elle fonctionne automatiquement et recherche de nouvelles informations lorsque celles-ci sont disponibles.
Vous ne pouvez utiliser cette option que si le diffuseur la prend en charge. Utilisez le bouton “ ” ou “ ” pour sélectionner une rubrique. Utilisez ensuite les boutons “ ” ou “ ” pour régler. Description Audio (En option) Cette fonction permet d’activer ou de désactiver l’option Description audio en appuyant sur les touches “ ” ou “ ”. Langue préférée (En option) En appuyant sur les touches “ ” ou “ ”, vous modifiez la langue préférée de la description audio.
Installation Le menu Installation vous permet essentiellement d’élaborer un tableau des chaînes de la manière la plus efficace possible. Sélectionnez « Installation » à partir du menu de configuration en pressant le bouton “ ” ou “ ”. Sélectionnez votre Pays, Langue et Langue de texte en utilisant le boutons “ ” ou “ ” et “ ” ou “ ”. Pressez le bouton “OK” ou ROUGE (RED) pour continuer. Pour annuler, pressez le bouton BLEU (BLUE).
en surbrillance supprimera le tableau des chaînes existantes. Il vous sera ensuite demandé de confirmer la suppression de toutes les chaînes et de tous les paramètres: En sélectionnant Oui (Yes) et en appuyant sur le bouton “OK”, la liste des chaînes existantes sera supprimée. Une fois les paramètres d’usine chargés, le menu « Première installation » s’affichera. Le menu qui s’affiche pour la sélection de la langue apparaît en premier.
Affichage des fichiers JPG Lecture Vidéo Lecture (Bouton Rouge) : Démarre la lecture vidéo. Stop (Bouton Bleu) : Arrête la lecture vidéo. Pause (Bouton OK) : Pause la lecture vidéo. Rembobiner (Touche directionnelle gauche) : Revient en arrière. Sauter (Touches numériques) : saute le fichier sélectionné en utilisant les touches numériques. Réglage vers l’avant (Touche directionnelle droit) : Avance. OK : affiche l’image sélectionnée en plein écran. Menu (Touche M) : Règle le sous-titre/Audio.
Contraste/Luminosité/Netteté/Couleur/Teinte (Contrast/Brightness/Sharpness/Colour/ Hue) Menu Son Appuyez sur le bouton “ ” ou “ ” pour sélectionner l’option désirée. Appuyez sur le bouton “ ” ou “ ” pour régler le niveau. Remarque: L’option Teinte (Hue) ne peut être visible que lorsque le téléviseur reçoit un signal NTSC. Colour Temperature (Température de couleur) Appuyez sur la touche “ ” ou “ ” pour sélectionner Température de couleur.
Couper Casque Verrouillage parental Pressez le bouton “ ” ou “ ” pour sélectionner Casque. Appuyez sur la touche “ ” ou “ ” pour régler l’option Couper Casque sur Activer ou Désactiver. Pressez le bouton “ ” ou “ ” pour sélectionner Verrouillage parental. Si vous voulez couper le son en provenance du casque, veuillez changer l’option Couper Casque en le définissant sur Activer. Par ailleurs, lorsque le son du téléviseur est déjà coupé, vous pouvez utiliser cette fonction pour rétablir le son du casque.
Sortie Ext Appuyez sur le bouton “ ” ou “ ” pour sélectionner l’option Sortie Ext. Utilisez le bouton “ ” ou “ ” pour régler la sortie Ext sur Activé ou Désactivé. Remarque: Vous pouvez recourir au mode YPbPr uniquement lorsque vous raccordez un appareil doté d’une sortie YPbPr à travers l’entrée PC avec le câble YPbPr pour PC. (Le câble YPbPr n’est pas fourni).
Mémoriser APS (Système d’auto-programmation) Appuyez sur le bouton “ ” ou “ ” pour sélectionner l’option Mémoriser. Pressez le bouton “ ” ou OK pour stocker les paramètres. “Mémorisé...” apparaîtra à l’écran. Quand vous pressez la touche BLEUE pour démarrer le réglage automatique, le Menu du Système d’autoprogrammation APS apparaît à l’écran: Tableau des programmes Sélectionnez Tableau des Programmes en pressant le bouton “ ” ou “ ”.
Sélectionnez l’élément Fréquence pilote à l’aide du bouton “ ” ou “ ”. Utilisez le bouton “ ” ou “ ” pour régler la valeur. Menu Image PC-VGA Pour ajuster les éléments de l’image du PC, procédez comme suit: Appuyez sur le bouton “ ” ou “ ” pour sélectionner la deuxième icône. Le menu image PC apparaît à l’écran. Les réglages du contraste, de la luminosité, de la température de couleur et du Mode jeu dans ce menu sont les mêmes que les réglages dans le menu image TV du Système de Menu « TV analogique ».
Sélection du mode Image Télétexte En pressant le bouton PRESETS , vous pouvez modifier les paramètres du Mode Image selon vos besoins. Les options disponibles sont Dynamique, Naturel, et Cinéma. Remarque: Le mode zoom ne peut pas être changé en mode PC-VGA. Modes Zoom Vous pouvez modifier le format de l’image (la taille de l’image) du téléviseur pour afficher l’image dans des modes zoom différents. Appuyez sur la touche SCREEN pour modifier directement le mode zoom.
Sous-titre Télétexte (en mode TV analogique uniquement) Si vous appuyez sur la touche “SOUS-TITRE”, les informations relatives au sous-titre du télétexte s’afficheront dans le coin droit inférieur de l’écran (si disponible). Vous avez la possibilité de régler l’option souhaitée en la sélectionnant à l’aide de la touche “ ” ou “ ”, puis en appuyant sur la touche OK. Conseils Persistance d’image Veuillez noter qu’une incrustation peut se produire en affichant une image persistante.
Annexe A : Modes d’affichage typiques d’une entrée de PC L’écran dispose d’une résolution maximale de 1920 X 1080. Le tableau suivant illustre certains modes d’affichage vidéo typiques. Votre téléviseur ne peut pas prendre en charge différentes résolutions. Les modes de résolution pris en charge figurent sur la liste ci-dessous. Si vous faites passer votre PC à un mode non pris en charge, un message d’avertissement apparaît à l’écran. Résolution Index Fréquence Hor.
Annexe B : Compatibilité des signaux AV et HDMI (types de signal d’entrée) Source EXT-1 (SCART) FAV YPbPr HDMI-1 Signaux pris en charge Disponible PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 2
Annexe C: Formats de fichier pris en charge pour le mode USB Média Extension de fichier .mpg/ .dat/ .vob .mpeg Lecture .avi Musique Format Remarques Vidéo Audio MPEG1 MPEG Layer 1/2/3 MPEG2 MPEG2 XviD/ 3ivx PCM/MP3/ WMA Version XviD jusqu’à: 1.1.2 MPEG4 PCM/MP3/ WMA Support ASP(les points GMC prennent en charge uniquement 1) MS ISO MPEG4 PCM/MP3/ WMA Prend en charge SP et ASP PCM Fréquence de test: 8K ~ 48KHz - MPEG 1/2 .mp3 (Résolution maximale/Débit binaire, etc.
Spécifications TÉLÉDIFFUSION PAL/SECAM B/G D/K K’ I/I’ L/L’ RÉCEPTION DE CANAUX VHF (BANDE I/III) UHF (BANDE U) HYPERBANDE APPAREIL MHEG-5 conforme à l’ISO / IEC 13522-5 UK engine Profile 1 Support conforme à l’ISO/IEC 135818-6 et au profil UK DTT Gamme de fréquence 474-850 MHz pour les modèles du RU Réception numérique 170-862 MHz pour les modèles de l’UE. Normes de transmission : DVB-T.
Contents Package Contents ................................................ 66 Features ............................................................... 66 Introduction ........................................................... 66 Preparation ........................................................... 66 Safety Precautions ............................................... 67 Power Source ................................................... 67 Power Cord .......................................................
• PC input. • Plug&Play for Windows 98,ME,2000,XP, Vista. • Game Mode Package Contents Introduction Thank you for choosing this product. This manual will guide you for the proper operation of your TV. Before operating the TV, please read this manual thoroughly. EPG SCREEN SUBTITLE LANG ABC SLEEP 1 2 3 JKL MNO PQR 6 4 5 STU VWX YZ 7 8 9 FAV LCD TV GHI DEF 0 TV Please do keep this manual in a safe place for future references. DTV This set is intended for private use only.
Safety Precautions Lightning Read the following recommended safety precautions carefully for your safety. Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug.
Disconnecting the Device The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable. Headphone Volume so that in case of emergency the mains plug can be pulled immediately. To exclude the danger of fi re, the power cord should principally be separated from the mains socket prior to a longer period of non-usage, i.e. during vacations. Electrical device not in the hands of children Excessive sound pressure from earphones and headphones can cause hearing loss.
Overview of the Remote Control 1. Standby 2. Yellow / Feature menu / Current language (*) (in DTV mode) 3. Blue / Install menu / Favourite mode (*) (in DTV mode) 4. No function 5. Electronic programme guide (in DTV mode) EPG 6. Sleep timer 7. Subtitle (in DTV mode) / TXT Subtitle (analague TV mode 8. Numeric buttons 9. TV – Digital TV mode SCREEN SLEEP GHI ABC DEF 1 2 3 JKL MNO PQR 6 4 5 STU VWX YZ 7 8 9 FAV 0 10. Volume up 11.
LCD TV and Operating Buttons FRONT and REAR VIEW SIDE VIEW Control Buttons 1. Up button 2. Down button 3. Programme/Volume / AV selection button 4. Standby / On button Note:You can use “+/-” buttons to change volume. If you want to change channels, press P/V/AV button once and then use “+/-” buttons. If you hold the P/V/AV button about a few seconds, source OSD will be displayed. Main menu OSD cannot be displayed via control buttons. 1. SCART socket inputs or outputs for external devices.
Viewing the Connections - Side Connectors 1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section 2. USB Input (functional in DTV mode only 3. Video Input is used for connecting video signals of external devices.Connect the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on your device. 4. Audio Inputs are used for connecting audio signals of external devices.
Connecting the LCD TV to a PC HDMI 1 For displaying your computer’s screen image on your LCD TV, you can connect your computer to the TV set. • Power off both computer and display before making any connections. • Use 15-pin D-sub display cable to connect a PC to the LCD TV. Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection. • When the connection is made, switch to PC-VGA source. See “Input selection” section.
Connecting to a DVD Player If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections. Note: Cables shown in the illustration are not supplied. • If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player as illustrated below, switch to HDMI source.
Inserting Batteries into the Remote Control Input Selection • Remove the battery cover located on the back of the remote control by gently pulling backwards from the indicated part. • Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover. Once you have connected external systems to your TV, you can switch to different input sources. • Press SOURCE button on your remote control for directly changing sources.
Operation with the Remote Control • The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV. • Functions of the menu system are described in the following sections. The IDTV will automatically tune to the UHF or VHF(*) (* for EU countries) transmission channels, searching for digital terrestrial TV broadcasts and displaying the names of channels found.
Press the “M” button to display the main menu, highlight the Setup and then Language menu using “ ” or “ ” button and press the OK button to display the “Language settings” menu. If the selected channel is locked, you must enter the correct four numeric code to view the channel. “Enter PIN” will be displayed on the screen in such a case: Highlight the “Subtitle” item in “Language settings” menu and use ” or “ button to set Subtitle to the desired language.
PLEASE NOTE: Menu size changes depending on the chosen image size. Notice ! Dolby D audio type is not supported. In this case, Tv sound will be muted. If the broadcast includes AC3 stream, the following warning message will be displayed on the screen: To watch a specific channel, highlight it using “ ” or “ ” button and then press “OK” button, while the “Select” item on Channel List menu is highlighted by using “ ” or “ ” button.
Renaming Channels Setting Favourites To rename a specific channel, the channel must be highlighted by pressing “ ” or “ ” button. Then highlight the Edit Name item by pressing “ ” or “ ” button as illustrated below. Press the “OK” button to activate the rename feature. To set a favourite you should highlight the “Favourites” item at the bottom of the Channel List menu. Then press “OK” button and Edit Favourite List menu appears on the screen.
To display timers window, activate the item from the main menu. To add a timer, press the YELLOW button on the remote control. Then “Add Timer” window appears. Mode: Selects channel list mode. Note: Insert or remove the CI module only when the TV is in STANDBY mode or disconnected from the mains. TV Setup You can use this item to display the TV functions. Channel: “ ” or “ ” keys will navigate the user through the TV or Radio list.
Channel List Maturity Lock (optional) (*) Use “ ” or “ ” buttons to go to Channel List option. Use “ ” or “ ” buttons to toggle Channel List Mode. If you select “TV Only”, with the “ ” or “ ” buttons, you navigate through only TV channels. If you select “Radio Only”, with the “ ” or “ ” buttons, you navigate through only radio channels. If you select “Text Only”, with the “ ” or “ ” buttons, you navigate through only text channels.
Audio Description (Optional) Preferred Audio description refers to an additional narration track for blind and visually impaired viewers of visual media, including television and movies. The description narrator talks through the presentation, describing what is happening on the screen during the natural pauses in the audio (and sometimes during dialogue, if deemed necessary). You can use this feature, only if the broadcaster supports that additional narration track.
Installation The Installation menu is mainly intended to help you for creating a Channel Table in the most efficient way. Select Installation from the Configuration menu by pressing “ ” or “ ” buttons. Select your Country, Language and Text language by using “ ” or “ ” and “ ” or “ ” buttons. Press “OK” or RED button to continue. To cancel, press BLUE button.
settings are loaded, “First Time Installation” menu will be displayed. Playing MP3 Files The menu which is displayed for language selection appears on the screen at first. By using “ ” or “ ” buttons, select the desired language option, and press OK button to activate. Afterwards, “First time installation” OSD will appear on the screen. By pressing “ ” or “ ” buttons, select the Country you want to set and press “OK” button (* only for EU countries). Play This (OK button) : Plays the selected file.
Pause (Yellow button) : Pause the slideshow. Continue (Green button) : Continue with the slideshow. Analogue TV Menu System Picture Menu Previous/Next (Left/Right buttons) : Jump to previous or next file of slideshow. Rotate (Up/Down buttons) : Rotate the picture using up/down buttons. Return/Back : Back to file list. Shuffle (Red button) : Shows the files randomly and continuous in current folder and icon turns the highlighted icon.
Picture Zoom Balance Select Picture Zoom by pressing “ ” or “ ” button. This setting is used for emphasizing left or right speaker balance. Use “ ” or “ ” buttons, to change picture zoom to Auto, 16:9 or 4:3. Reset Press “ ” or “ ” button to select Reset. Press “ ” button to reset the picture modes to factory default settings.“RESETTING” will be displayed on the screen. Press “ ” or “ ” button to select Balance. Press “ ” or “ ” button to change the level of the balance.
Child Lock Auto Tv Off: Press “ ” or “ ” button to select Child Lock. Press “ ” or “ ” button to select Auto Tv Off. Use “ ” or “ ” button to set the Auto Tv Off as Off,1H,2H,3H,4H,5H or 6H. Use “ ” or “ ” button to set the Child Lock On or Off. When On is selected, the TV can only be controlled by the remote control. In this case the control panel buttons will not work, except for the Standby/ On button.
Program Press “ ” or “ ” button to select Program. Use “ ” or “ ” button to select the program number. You can also enter a number using the numeric buttons on the remote control. There are 200 programme storage between 0 and 199. AV modes). By cursor action, programme selection is done automatically. Name To change the name of a programme, select the programme and press the RED button. Band can be selected either C or S. Press “ ” or “ ” button to set Band.
PC-VGA Mode Menu System See “Connecting the LCD TV to a PC” section for connecting a PC to the TV set. For switching to PC-VGA source, press “SOURCE” button on your remote control and select PC-VGA input. You can also use “Source” menu to switch to PC-VGA mode. Note: That PC-VGA mode menu settings are available only while the TV is in PC-VGA source. PC-VGA Position Menu Select the first icon by pressing “ ” or “ ” button.
Zoom Modes Teletext You can change the aspect ratio (image size) of the TV for viewing the picture in different zoom modes. Press SCREEN button to directly change the zoom mode. Available zoom modes are listed below. Note: In YPbPr and HDMI modes, while in 720p-1080i resolutions, only 16:9 mode is available. Teletext system is available if your broadcaster supports. Teletext system transmits information such as news, sports and weather on your TV.
Tips Image Persistence Please note that ghosting may occur while displaying a persistent image. LCD TVs’ image persistence may disappear after a short time. Try turning off the TV for a while. To avoid this, do not leave the screen in still picture for extended periods. No Power If your TV system has no power, please check the main power cable and connection to the mains socket outlet.
Appendix A: PC Input Typical Display Modes The display has a maximum resolution of 1920 X 1080. The following table is an illustration of some of the typical video display modes. Your TV may not support different resolutions. Supported resolution modes are listed below. If you switch your PC to an unsupported mode, a warning OSD will appear on the screen. Resolution Index Frequency Hor Ver Ver (Hz) Hor (KHz) Standard 1 640 480 60 31.5 VESA 2 640 480 72 37.9 VESA 3 640 480 75 37.
Appendix B: AV and HDMI Signal Compatibility (Input Signal Types) Source EXT-1 (SCART) FAV YPbPr HDMI-1 Supported Signals Available PAL 50/60 O NTSC 60 O RGB 50 O RGB 60 O PAL 50/60 O NTSC 60 O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 50Hz O 1080P 60Hz O 480I 60Hz O 480P 60Hz O 576I 50Hz O 576P 50Hz O 720P 50Hz O 720P 60Hz O 1080I 50Hz O 1080I 60Hz O 1080P 24Hz X 1080P
Appendix C: Supported File Formats for USB Mode Media File Extension .mpg/ .dat/ .vob .mpeg Movie .avi Music Format Remarks Video Audio MPEG1 MPEG Layer 1/2/3 (Maximum resolution/Bit rate etc.) MPEG2 MPEG2 XviD/ 3ivx PCM/MP3/ WMA XviD Verson up to: 1.1.2 MPEG4 PCM/MP3/ WMA Support ASP(GMC warping points only support 1) MS ISO MPEG4 PCM/MP3/ WMA Support SP and ASP PCM Sample Rate: 8K ~ 48KHz - MPEG 1/2 .mp3 - Sample Rate: 8K ~ 48KHz, Bit Rate: 32K~320Kbps Layer 1/ 2/ 3 (MP3) .
Specifications TV BROADCASTING PAL/SECAM B/G D/K K’ I/I’ L/L’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profile 1 Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profile Frequency range: 474-850 MHz for UK models Digital Reception 170-862 MHz for EU models Transmission standard: DVB-T. MPEG-2 Demodulation: COFDM with 2K/8K FFT mode FEC: all DVB modes Video: MP@ML, PAL, 4:3/16:9 Audio: MPEG Layer I&II 32/44.
CH Wir freuen uns, dass Sie sich für den Kauf eines Produktes unseres Hauses entschieden haben, und wünschen Ihnen viel Spaß mit diesem hochwertigen Produkt. Unsere strenge Fertigungskontrolle gewährleistet die hohe Qualität unserer Geräte. Für den Fall, dass Sie dennoch eine berechtigte Beanstandung haben, gewähren wir eine Garantie für die Dauer von 2 Jahren ab Kaufdatum nach den nachfolgenden Bedingungen: 1.
9. Kein Garantieanspruch besteht: - bei unsachgemäßer Behandlung - bei mechanischer Beschädigung des Gerätes von außen - bei Transportschäden - bei Verschleiß - bei Bedienungsfehlern - bei Aufstellung des Gerätes in Feuchträumen oder im Freien - bei Schäden, die auf höhere Gewalt, Wasser, Blitzschlag, Überspannung zurückzuführen sind - bei übermäßiger Nutzung, insbesondere bei anderer als privater Nutzung - bei Missachtung der Bedienungsanleitung. - wenn das Gerät keinen technischen Defekt aufweist.
CH Nous vous remercions pour l'achat de ce produit de haute qualité et souhaitons qu'il vous donne entière satisfaction. Des contrôles stricts de la production nous permettent d'assurer la qualité exceptionnelle de nos appareils. Si vous avez malgré tout une réclamation, votre appareil bénéficie d'une garantie pour une durée de 2 ans à compter de la date d'achat et sous les conditions suivantes : 1. Cette garantie ne modifie en rien les droits de garantie légaux.
7. La garantie expire si l'appareil a été ouvert par vous-même ou par un tiers non autorisé et/ou si l'appareil a été modifié. 8.
CH Ci congratuliamo per la Vostra decisione di acquistare un prodotto della nostra casa e Vi auguriamo il massimo del divertimento con questo prodotto di altissima qualità. I nostri severi controlli di produzione garantiscono la massima qualità dei nostri apparecchi. Se ciononostante doveste presentare un reclamo legittimo, assicuriamo una garanzia della durata di 2 anni a partire dalla data di acquisto e conformemente alle seguenti condizioni: 1.
9.
50170364