User Manual TL-FO2-HDC 300m Fiber Optic Extender Set for HDMI, RS232 & IR All Rights Reserved Version: TL-FO2-HDC _170912
TL-FO2-HDC User Manual Preface Read this user manual carefully before using this product. Pictures shown in this manual are for reference only; the actual product may vary. This manual is only for operation instruction only and not for any maintenance or repair. Trademarks Product model and logo are trademarked. Any other trademarks mentioned in this manual are acknowledged as the properties of the trademark owner. No part of this publication may be copied or reproduced without prior written consent.
TL-FO2-HDC User Manual SAFETY PRECAUTIONS To insure proper operation, please read all instructions carefully before using the device. Save this manual for further reference. l Unpack the equipment carefully and save the original box and packing material for possible future shipment l Follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons. l Do not dismantle the housing or modify the module. It may result in electrical shock or burn.
TL-TP70-HDC User Manual Table of Contents 1. Introduction ................................................................................................................. 1 1.1 Introduction to TL-FO2-HDC ............................................................................. 1 1.2 Features ............................................................................................................. 1 1.3 Package Contents ................................................................................
TL-FO2-HDC User Manual 1. Introduction 1.1 Introduction to TL-FO2-HDC The TechLogix TL-FO2-HDC is an HDMI extender set with HDCP 2.2 compatibility, which offers the distribution of compressed UHD video, audio, and either RS232 or IR up to 300m/984ft over fiber optic cable. In addition to 4K/60 video with multichannel audio, the TL-FO2-HDC supports HDR, RGB, and YCbCr 4:4:4 color spaces.
TL-FO2-HDC User Manual 2. Panel Description 2.1 Transmitter No.
TL-FO2-HDC2 User Manual 3 OPTICAL OUT 4 RS232 5 IR IN Connects to a 5V IR receiver (with carrier); signals tranmitted to the remote receiver 6 IR OUT Connects to a 5V IR emitter (with carrier); signals tranmitted from the remote receiver 7 CONTROL SELECTOR Switch between IR or RS232 control pass-through & Connect to the OPTICAL IN socket on the receiver via a duplex multi-mode cable RS232 control connector Pictures shown in this manual are only for reference. 2.2 Receiver No.
TL-FO2-HDC2 User Manual C HDCP OFF: No HDMI signal FLASHING: Non-encrypted video is being received ON: Encrypted video is being received D Link 1 12V DC OFF or FLASHING: Link to the transmitter has not been established ON: Link to the transmitter has been established Connect to the power supply 2 HDMI OUT Connect to an HDMI display 3 OPTICAL IN Connect to the OPTICAL OUT socket on the transmitter via a duplex multi-mode cable 4 RS232 RS232 control connector 5 IR IN Connects to a 5V IR re
TL-FO2-HDC User Manual 3. System Connection 1. Using quality HDMI cables, connect an HDMI source (such as Blu-ray, games console, satellite/cable TV, media server etc.) to HDMI IN of the TL-FO2-HDC transmitter (TX). 2. Connect a good quality, well-terminal fiber cable between the OPTICAL OUT of the TL-FO2-HDC transmitter (TX) to the OPTICAL IN Input of the TL-FO2-HDC receiver (RX). 3. Connect the HDMI display device (LED/LCD display or projector) to the HDMI OUT of the TL-FO2-HDC receiver (RX). 4.
TL-FO2-HDC2 User Manual 4. Specification Transmitter Input/Output HDMI Input 1 HDMI Receptacle Optical Output 2 LC Ports via SFP+ Module IR Input/Output 2 3.5mm TRS Ports RS232 1 3-pin Removable Terminal Block 12V DC 1 5.5mm OD/2.5mm ID Threaded Barrel Connector Control Selector 1 2-position Switch Receiver Input/Output HDMI Output 1 HDMI Receptacle Optical Input 2 LC Ports via SFP+ Module IR Input/Output 2 3.5mm TRS Ports RS232 1 3-pin Removable Terminal Block 12V DC 1 5.5mm OD/2.
TL-FO2-HDC2 User Manual Signal Compression 1.8:1 Maximum; Compression starts when video signal >9 Gbps Chassis and Environmental Product Construction Painted aluminum Product Dimensions (W*H*D) 150 mm (5.91 in) x 20 mm (0.79 in) x 74.4 mm (2.
TL-FO2-HDC User Manual 5. Panel Drawing 5-1 Transmitter 5-2 Receiver 8 www.tlnetworx.
TL-FO2-HDC2 User Manual 6. Troubleshooting & Maintenance l No image on display: l Ensure that the display device has been set to the correct input. l Ensure that the HDMI cables used for both the source/transmitter and the receiver/display are properly connected and are working. Test the HDMI cables directly from a source to display and ensure their operation. l Ensure that the fiber optic cable has not been damaged and that it has been terminated correctly on both ends.
TL-FO2-HDC2 User Manual 7. After-sales Service 1) Product Limited Warranty: We warrant that our products will be free from defects in materials and workmanship for three years.
