User Manual

5
www.tlnetworx.com
TL-FO2-HDC User Manual
3. System Connection
1. Using quality HDMI cables, connect an HDMI source (such as Blu-ray, games
console, satellite/cable TV, media server etc.) to HDMI IN of the TL-FO2-HDC
transmitter (TX).
2. Connect a good quality, well-terminal fiber cable between the OPTICAL OUT of the
TL-FO2-HDC transmitter (TX) to the OPTICAL IN Input of the TL-FO2-HDC
receiver (RX).
3. Connect the HDMI display device (LED/LCD display or projector) to the HDMI OUT
of the TL-FO2-HDC receiver (RX).
4. For two-way IR control of connected sources and displays from either location,
first, connect IR Emitters to the IR OUT ports of the TL-FO2-HDC transmitter (TX)
and TL-FO2-HDC receiver (RX), and then insert IR Receivers into the IR IN ports
of the TL-FO2-HDC transmitter (TX) and TL-FO2-HDC receiver (RX).
5. Connect the included 12V power supplies to the TL-FO2-HDC transmitter (TX) and
TL-FO2-HDC receiver (RX).
Check Power, Status, and HDCP & Link lights are illuminated on both units to indicate
successful connection, with a lit HDCP light illustrating the presence of encryption
within the signal. Power and Link are static lights. Status should be blinking.