Installation Manual

Advanced iDRAC6 Configuration 107
5 Click Apply Changes .
6 Click the appropriate Terminal Mode Settings page button to continue.
See the
iDRAC6 Online Help for description of the Terminal Mode
Settings
page buttons.
Configuring the iDRAC6 Network Settings
CAUTION: Changing your iDRAC6 Network settings may disconnect your current
network connection.
Configure the iDRAC6 network settings using one of the following tools:
• Web-based Interface — See "Configuring the iDRAC6 NIC" on page 49.
• RACADM CLI — See cfgLanNetworking in the
RACADM iDRAC6 and
CMC Command Line Reference Guide
available on the Dell Support
website at
dell.com/support/manuals .
•
iDRAC6 Configuration Utility — See "Configuring Your System to Use
an iDRAC6" on page 34.
NOTE: If you are deploying the iDRAC6 in a Linux environment, see "Installing
RACADM" on page 38.
Table 5-10. Terminal Mode Settings
Setting Description
Line Editing Enables or disables line editing.
Delete Control Select one of the following:
• iDRAC outputs a <bksp><sp><bksp> character
when <bksp> or <del> is received —
•
iDRAC outputs a <del> character when <bksp> or
<del> is received —
Echo Control Enables or disables echo.
Handshaking Control Enables or disables handshaking.
New Line Sequence Select None, <CR-LF>, <NULL>, <CR>, <LF-CR>,
or <LF>.
Input New Line
Sequence
Select <CR> or <NULL>.