Installation Manual

136 Adding and Configuring iDRAC6 Users

Local RACADM and Remote RACADM:

racadm sshpkauth -i <2 to 16> -k <1 to 4> -f

racadm sshpkauth -i <2 to 16> -k <1 to 4> -t

<key-text>

Telnet/SSH/Serial RACADM:

racadm sshpkauth -i <2 to 16> -k <1 to 4> -t

<key-text>

Example:

Upload a valid key to the iDRAC6 User 2 in the first key space using a file:

$ racadm sshpkauth -i 2 -k 1 -f pkkey.key

PK SSH Authentication Key file successfully uploaded to the RAC.

CAUTION: The "key text" option is supported on local and remote RACADM. The

"file" option is not supported on Telnet/ssh/serial RACADM.

View

The view mode allows the user to view a key specified by the user or all keys.

racadm sshpkauth -i <2 to 16> -v -k <1 to 4>

racadm sshpkauth -i <2 to 16> -v -k all

Delete

The delete mode allows the user to delete a key specified by the user or all

keys.

racadm sshpkauth -i <2 to 16> -d -k <1 to 4>

racadm sshpkauth -i <2 to 16> -d -k all

For information on the subcommand options, see sshpkauth subcommand

in the iDRAC6 and CMC Command Line Reference Guide available on the

Dell Support website at dell.com/support/manuals.