Installation Manual

224 Using the WS-MAN Interface
4 SM CLP Admin Domain
Defines CIM classes for representing CLP’s configuration. iDRAC6 uses this profile
for its own implementation of CLP.
5 Power State Management
Defines CIM classes for power control operations. iDRAC6 uses this profile for the
host server’s power control operations.
6 Power Supply (version 1.1)
Defines CIM classes for representing power supplies. iDRAC6 uses this profile to
represent the host server’s power supplies to describe power consumption, such as
high and low power consumption watermarks.
7 CLP Service
Defines CIM classes for representing CLP’s configuration. iDRAC6 uses this profile
for its own implementation of CLP.
8 IP Interface
9 DHCP Client
10 DNS Client
11 Ethernet Port
The above profiles define CIM classes for representing network stacks. iDRAC6 uses
these profiles to represent the configuration of the iDRAC6 NIC.
12 Record Log
Defines CIM classes for representing different type of logs. iDRAC6 uses this profile
to represent the System Event Log (SEL) and iDRAC6 RAC Log.
13 Software Inventory
Defines CIM classes for inventory of installed or available software. iDRAC6 uses
this profile for inventory of currently installed iDRAC6 firmware versions through
the TFTP protocol.
14 Role Based Authorization
Defines CIM classes for representing roles. iDRAC6 uses this profile for configuring
iDRAC6 account privileges.
15 Software Update
Defines CIM classes for inventory of available software updates. iDRAC6 uses this
profile for inventory of updates of the firmware through the TFTP protocol.
16 SMASH Collection
Defines CIM classes for representing CLP’s configuration. iDRAC6 uses this profile
for its own implementation of CLP.
Table 10-1. Standard DMTF (continued)