Installation Manual

26 iDRAC6 Overview
NOTE: Due to serious security flaws, support for SSL 2.0 has been discontinued.
Your browser must be configured to enable SSL 3.0 in order to work properly.
Internet Explorer 6.0 is not supported.
Supported Remote Access Connections
Table 1-2 lists the connection features.
iDRAC6 Ports
Table 1-3 lists the ports iDRAC6 listens on for connections. Table 1-4
identifies the ports that the iDRAC6 uses as a client. This information is
required when opening firewalls for remote access to an iDRAC6.
Table 1-2. Supported Remote Access Connections
Connection Features
iDRAC6 NIC
• 10 Mbps/100 Mbps Ethernet
• DHCP support
• SNMP traps and e-mail event notification
• Support for SM-CLP (Telnet, SSH, and RACADM) command
shell, for operations such as iDRAC6 configuration, system
boot, reset, power-on, and shutdown commands
• Support for IPMI utilities, such as IPMItool and ipmish
Table 1-3. iDRAC6 Server Listening Ports
Port Number Function
22* SSH
23* Tel net
80* HTTP
443* HTTPS
623 RMCP/RMCP+
5900* Virtual Console keyboard/mouse, Virtual Media Service,
Virtual Media Secure Service, and Virtual Console video
* Configurable port