Installation Manual

Recovering and Troubleshooting the Managed System 333
The Work Notes page displays enables you to enter work notes and provides
other information as shown in Table 19-8.
To enter the work notes:
1
In the Work Notes page, under the Add Work Notes section, enter the
work note in the field displayed.
NOTE: A maximum of 50 alphanumeric characters is supported for the work
note.
2 Click Save .
The new work note is displayed in the work notes table below the
Add
Work Notes
section.
T
Table 19-8. Work Notes
Field Description
Date/Time Displays the time stamp recorded for each work note entry. The
format is yyyy-mm-ddThh:mm:ssZ, based on a 24-hour clock, where,
yyyy : Year
mm : Month
dd : Day
T : Time
hh : Hour
mm : Minute
ss : Seconds
Z : The Time zone designator.
NOTE: If the time is in UTC, add a Z directly after the time without a
space. Z is the zone designator for the zero UTC offset. 09:30 UTC is
therefore represented as 09:30Z or 0930Z. 14:45:15 UTC would be
14:45:15Z or 144515Z.
Notes Displays the work note entry contents.