User's Manual

Technalogix Ltd Adrenaline Control System
VI-61
Web Interface
To access the Technalogix Adrenaline Web Interface, connect an Ethernet cable to the RJ45
port on the power amplifier (back panel) to your network. The Adrenaline control system in the
power amplifier should allocate an internal IP from your router or you can set this manually (see
below).
A computer can be plugged directly into the Ethernet port to directly access the on-board web
interface. Most new computers can do this with a standard Ethernet cable but some may
require a crossover Ethernet cable.
The default internal address is http://adrenaline/
or http://adrenaline/index.htm
After entering address into a web browser you will be asked for a password. Initially use:
username: admin
password: admin