User's Manual Part 2
Technalogix Ltd.
VIII-8
POWER - Tactile button to turn carriers on and off.
NAVIGATE - Tactile button to open menu and move cursor in menu. When the screen has
timed out, this button is also used to refresh the screen
SELECT- Tactile button to select item in menu or to refresh screen after it has been
timed out
RESET - Tactile button to reset microcontroller in control board. Also clears existing
faults. Individual control board with reset comes back on with soft start feature.
RF IN – RF input from modulator or processor. BNC connector, 50 ohm.
RF OUT – 500-watt RF output. Connects to RF IN on filter enclosure. 7/16” din connector,
50 ohm.
AC IN – AC input to switching power supply.
AC BREAKER – Resettable circuit breaker is used to protect against inrush currents and
high current draw from switching power supply. The thermal circuit breaker
is a single pole configuration.
AC ON/OFF - AC rocker switch (SPST) to supply AC to the AC-DC switching power supply
REMOTE PORT - The transmitter can be controlled and monitored by the remote port. See
“Monitor and Control System” section for details.