User manual

ManualsBrandsTECHNAXX ManualsHealth & WellbeingUpper arm Blood pressure monitor B06T

Technaxx

Blood Pressure Monitor B06T

User Manual

Measuring instrument for precise blood pressure and pulse rate

measurement on the upper arm

This device complies with the requirements of the standards referred to the Directive R&TTE

1999/5/EC. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom

“Konformitätserklärung”). Before using the device the first time, read the user manual carefully.

This device has a rechargeable battery. It must be fully charged before first use.

NOTE: Charge the battery of the device every 2–3 month if it is not used!

Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and

42 cent/minute from mobile networks). Free Email: support@technaxx.de

Features

 Enables very fast and reliable measurement of systolic and diastolic blood pressure as

well as pulse rate through the oscillometric method  Voice broadcast function  Bluetooth

connection (V4.0 & 3.0) with Smartphone  Operating through iOS or Android APP

 Unlimited number of users 1-key operation on device  Storage of the last 99

measurements (at the end of a measurement the device automatically stores each result

with date and time)  LED charging & Bluetooth indicator  Blood pressure result indicator

 Ø value function of the last 15 measurements  IP21 protection class (against solid

debris/material Ø 12.5mm & against vertically falling water drops)  Cuff and main unit are

integrated as one part  Built-in rechargeable lithium ion 800mAh battery 3.7V  For use at

home or in ambulances  Clinically proven accuracy and user friendly design

Important Hints and Warnings – Read carefully !

 Contact your doctor for further questions on the subject of blood pressure and its

measurement. In cases of irregular heartbeat, measurements made with this instrument

should only be evaluated after consultation with your doctor. Self-measurement means

control, not diagnosis or treatment, but only a healthcare professional is qualified to

interpret blood pressure measurements. Unusual values must always be discussed with

your doctor. Under no circumstances should you alter the dosages of any drugs prescribed

by your doctor. Familiarize yourself with the section titled "Important Information on Blood

Pressure and its Measurement". It contains important information on the dynamics of blood

pressure readings and will help you to obtain the best results.

Note: Arm circumference should be measured with a measuring tape in the middle of the

relaxed upper arm. Do not force cuff connection into the open wound.

Summary of content (15 pages)

PAGE 1
Technaxx® Blood Pressure Monitor B06T User Manual Measuring instrument for precise blood pressure and pulse rate measurement on the upper arm This device complies with the requirements of the standards referred to the Directive R&TTE 1999/5/EC. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”). Before using the device the first time, read the user manual carefully. This device has a rechargeable battery. It must be fully charged before first use.
PAGE 2
 This device can not be used together with HF-surgical equipment.  The pulse display is not suitable for checking the frequency of heart pacemakers, and the device shall not be serviced or maintained while in use with the patient. This device is NOT intended to replace regular medical checkups. In cases of irregular heartbeat (Arrhythmia), measurements made with this instrument should only be evaluated after consultation with your doctor.
PAGE 3
1.2. Which values are normal? Diastolic / Systolic blood presure Optimal blood presure (target value) Norma / High blood pressure Mild / Moderate / Severe hypertension Blood pressure is very high if your diastolic pressure is above 90 mmHg and/or your systolic blood pressure is over 160 mmHg, while at rest. In this case, please consult your physician immediately. Long-term values at this level endanger your health due to continual damage to the blood vessels in your body.
PAGE 4
1.3. What can be done if regular high or low values are obtained? a) Consult your doctor. b) Increased blood pressure values (various forms of hypertension) are associated with considerable health risks over time. Arterial blood vessels in your body are endangered due to constriction caused by deposits in the vessel walls (Arteriosclerosis). A deficient supply of blood to important organs (heart, brain, muscles) can result from arteriosclerosis.
PAGE 5
3. Components of the Blood Pressure Monitor B06T Charge Port Battery / Bluetooth Indicator Blood Pressure Indicator Power on/off & Start/Stop Button Mem (= Memory button) / Vol – Mem (= Memory button) / Vol + Upper Arm Cuff 4. Using your Monitor for the First Time  System Settings After the battery is fully charged, some functions can be set before use this monitor: 4.1. Start / Stop Press the Start/Stop button one time.
PAGE 6
5. Measurement Procedure Note: You should always be seated and calm before and during measurement. 5.1. Before measurement  Avoid eating and smoking as well as all forms of exertion directly before measurement. These factors influence the measurement result. Find time to relax by sitting in an armchair in a quiet atmosphere for about ten minutes before taking a measurement.  Remove any garment that fits closely to your upper arm.  Always measure on the same arm (normally left).
PAGE 7
c) Wrap the cuff around your upper left arm. The blue arrow (red mark) should be on the inside of your arm extending downward to your hand. Make certain the cuff lies approx. 1–2cm above the elbow. Important! The red mark on the edge of the cuff (Artery Mark) must lie over the artery which runs down the inner side of the arm. d) There should be little free space between your arm and the cuff. You should be able to fit two fingers between your arm and the cuff.
PAGE 8
d) After the monitor has detected your blood pressure and pulse rate, the cuff automatically deflates. Your blood pressure will be voiced out or shown on the APP on smart phone if operated by APP. e) The monitor will automatically turn off after two minutes not in operation.
PAGE 9
6. Operate on the device via APP (My Fitness) Press the Stop/Start button as the power on (BLUE indictor is turned on). The pump begins to inflate the cuff. After automatically reaching an individual pressure, the pump stops and the pressure slowly falls, until the measurement finish, the assessment result will be voice out, and the assessment indicator will turn to different colors accordingly. 6.1.
PAGE 10
Forth step: Complete “My Profile” and save it. Setting the language: After setting the “My Profile”, it will come to this interface-picture. Press the button on the upper right. Then you come to this language setting interface-picture. You can choose between 3 different languages (English, German and French).
PAGE 11
Connect Bluetooth: Turn on your device and detect it by the Technaxx APP (My Fitness). See the following 3 pictures. Click on the button “Bluetooth Device”. When you clicked on the button, you will come directly to this interface. A moment later, the device will be connected as shown in this picture.
PAGE 12
6.2. Start the measurement Once the device is connected via Bluetooth with your Smartphone, you can start the measurement by remote controlling on the APP. Slide the APP to the bottom and the button “START” will show up as shown in this picture. Press the button “START” and start the testing is shown like in this picture. When measuring is done, an interface about checking the result will show up.
PAGE 13
6.3. Check the measurement When the measurement is finished, the assessment will be voiced out and show on the APP, like in this picture. Slide the APP interface to the left. Now you can see the literal statement as shown in this picture. You can also check the historical record to know the blood pressure trend in certain period by pressing the button “History”. See your historical record interface on this picture.
PAGE 14
7. Troubleshooting Problem Check The battery indicator turns to RED Cause and Solution Charge the device under DC 5V/1A No power after charging After charging, the battery indicator never turns to GREEN Contact the support hotline No Inflation Err and stop working Err and stop working Whether the cuff is broken or leak Contact the support hotline.
PAGE 15
Care and Maintenance  This device is NOT sterilized. Wash your hands before and after each time measurement.  The cuff contains a sensitive air-tight bubble. Handle this cuff carefully and avoid all types of stress through twisting or buckling.  Keep the surface of the device clean with a soft and dry cloth. Do not use organic solvents. Spots on the cuff can be removed carefully with a damp cloth and soapsuds.