User manual

64
B: Video Mask
11.4.3.2 Camera Setting
A: Video Stream
Figure 11-16
11.4.3.3 Storage Manager
A: Schedule
Figure 11-17
 Record: System auto activates motion detection channel to record once an
alarm is detected.
 Delay: System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
 Snapshot: You can enable this function to snapshoot image when a motion
detect alarm is detected.
1. Click on the option Video
Stream you see in Figure
11-16.
2. Then select the channel you
like to configure.
3. You will see Figure 11-16,
where you can set options
for the Extra and the Main
stream. Encode, Video,
Audio (only TX-67),
Resolution, Frame rate, Bit
rate type and Bitrate.
Under Schedule you can set the
date & time and the recording type
(Normal (green), Motion (orange)
and Alarm (red)). See Figure 11-17
Select Date & Time and check the
box to select corresponding record
type. There are three types: Normal
/ Motion / Alarm.
Note: System only supports 6
periods in one day. Save the
settings after changing.