User manual

23
7.7 My messages
(1) Start the Security Advanced APP on the “Device List” screen, tap “My messages” to
enter my messages screen. (2) Tap a selected camera to enter next screen. (3) Tap to
view a picture captured when motion or PIR detection event occurred up. (4) Tap to
play back video.
7.8 User setting
To change the user name /password for Administrator or Operator via your Smartphone
follow the steps shown in the figure: (1) Open the APP Security Advanced, click the gear
shape icon on the right side to enter the camera setting interface. (2) Click “User setting” to
enter the User setting interface. (3) Enter User name and Password. (4) Click “Done”, the
User setting is finished.
Remark: Remember or write down the user settings. If you forget the user data you have to
reset (factory reset) the camera.