User manual

ManualsBrandsTECHNAXX ManualsBreakdown & EmergencyCar alarm TX-100 Remote control, In-car surveillance

Technaxx

* User Manual

Car Alarm with charging function TX-100

& Remote Control for monitoring of vehicle interiors via PIR

motion detection sensor

The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares

that this device, to which this user manual belongs, complies with the essential

requirements of the standards referred to the Directive RED 2014/53/EU. The

Declaration of Conformity you find here: www.technaxx.de/ (in bar at the

bottom “Konformitätserklärung”). Before using the device the first time, read

the user manual carefully.

Service phone No. for technical support: 01805 012643 (14 cent/minute from

German fixed-line and 42 cent/minute from mobile networks).

Free Email: support@technaxx.de

This device has a rechargeable battery. It must be fully charged before first

use. NOTE: Charge the battery of the device every 2–3 month if it is not used!

Keep this user manual for future reference or product sharing carefully. Do the

same with the original accessories for this product. In case of warranty, please

contact the dealer or the store where you bought this product.

Warranty 2 years

Enjoy your product * Share your experience on Amazon

Features

 12–24V rechargeable car alarm for the cigarette lighter socket

 Has 2 USB charging ports with 5V/1A output power each

 Automatic alarm triggering at motion detection by PIR sensor

(Passive Infrared sensor for physical movement detection for the

car's interior)

 Built-in 450mAh battery for ~6 days standby time ensures alarm

triggering even when engine is switched off

 Built-in alarm siren with 110dB

 Remote control to activate and deactivate the alarm

 LED status indicator

 Over-current protection 2.8A & short circuit protection

 Easy handling and installation

Summary of content (7 pages)

PAGE 1
Technaxx® * User Manual Car Alarm with charging function TX-100 & Remote Control for monitoring of vehicle interiors via PIR motion detection sensor The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares that this device, to which this user manual belongs, complies with the essential requirements of the standards referred to the Directive RED 2014/53/EU. The Declaration of Conformity you find here: www.technaxx.de/ (in bar at the bottom “Konformitätserklärung”).
PAGE 2
Technical Specification ~3m car interior (without obstacles (e.g. rear wall in trucks) Detecting range 120° cone angle Distance IR remote control ~8m (open field) Alarm time 2 minutes maximum USB output charging 2x 5V/1A Built-in rechargeable 450mAh lithium polymer Power battery 4.2V Charging time ~3–4 hours Working time ~5 days (by alarm 5-times a day) Standby time ~6 days Input voltage DC 12–24V (cigarette lighter socket) Charging current 65mA Operating current 26mA Transmission frequency 433.
PAGE 3
Product overview Car Alarm / Charger 1 PIR (Motion detection) Remote Control 4 Indicator (confirmation) USB charging slot 2 Remote button 5 (2x 5V71A) (activate/deactivate) Battery compartment of remote 3 Siren 6 control
PAGE 4
Charge the product First time using, plug device in the 12–24V cigarette socket to power on the device. Charge the device for 3–4hours before using it. You can also use an external charger* (*not included) to charge the device. Note: In some cars the cigarette lighter socket is off power when the engine of the car is not started. So please start your car to power the cigarette lighter socket. Get started After inserting to the cigartte lighter socket, three operations will happen at the same time: 1.
PAGE 5
Remote Control & Functions Activate (Arm) PIR sensor can be activated by pressing the remote button shortly or inserting the device into a cigarette lighter socket. Once PIR sensor is activated, it takes about 5 seconds until the device is armed. When armed the blue light flashes every 5 seconds. After human action is detected, blue light flashes quickly each second and the siren is noising loudly.
PAGE 6
USB charger function If the device is powered from a car cigarette lighter socket, you can connect the USB charger port to your mobile phone with a USB cable* (*not included). The device now is working as mobile phone charger. It is also possible to charge other devices via USB. Note: Maximum output of USB is 2x 1A. Dual Mode If you have two car alarms you can handle them with one remote. No need to take two remotes with you.
PAGE 7
Warnings To prolong the life of this device, pull it out when starting the engine of the car. Do not remove any cover to avoid the risk of an electric shock or other damages. Do not attempt to disassemble the device, it may result in short-circuit or even damage. Do not drop or shake the device, it may break internal circuit boards or mechanics. Keep the device in dry and ventilated environment. Avoid high humidity and high temperature.