User manual

5
2. Make sure they are on the right places
Match the pins of the charging adapter with the
contact points on your TX-81 wristband and snap
them together. The magnet will hold the base in
place.
3. Plug it in
Plug the small end of the Micro USB cable into the
magnetic charging base, and connect the large end
to a USB power source.
Battery status will show in screen.
Low power
Charging
process
Charging
process
Charging
completed
The TX-81 wristband indicates the battery charge level when it is being charged.
Make sure the USB interface is connected in correct to the magnetic charging
base.
The TX-81 wristband can be charged directly via USB (DC 5V). Screen is always
lit up during charging. When the wristband is full charged, the power icon is
shown as full battery. The screen light turns off only after another minute. Move
out the charger, the device will display full charging for 3s, and turns into
standby.
Standby time is ~5 days (depending on the actual usage).
Do not try to take out built-in battery. Use the TX-81 charging base with the
included Micro USB cable for charging. Keep using and charging the wristband.
Attention: During charging, Bluetooth of the TX-81 wristband will be turned off
and cannot sync data.