Instructions

Info method 2:
 When the door opener is pressed, the outdoor unit can be operated without a
battery.
 The voltage of the door opener should be equal to the used bell transformer.
Attentions during Installation
 The outdoor photosensitive sensor should not be hidden or blocked by other
objects.  Do not face outdoor unit to sunlight directly.  Do not stick label on the
speaker, otherwise, the sound effect of doorbell will be affected.  Install the
connection line correctly; otherwise, door phone disabled may be caused.
Wall holder Installation
Table holder Installation
Installation of MicroSD card
 Insert the storage card in the way as shown in the diagram until you hear a
clicking sound.  Improper insertion of storage card may cause system failure,
please confirm the inserting direction of the card.  Take out of the storage card.
Push in the storage card until you hear a clicking sound, then the storage card will
pop out.
Storage Card Introduction
 This product adopts MicroSD card as external storage device, when there is no
storage card in the product, videos can not be recorded. Photos are taken to the
internal storage in general.
 If a self-provided storage card is used: Use a storage card with Class 4 or
above. Up to 32GB storage card supported. This machine has automatic cyclic
storage function, when the storage card is full, the original file will be overwritten.
Or take out the MicroSD card and connect to computer by card reader.
ATTENTION: Do not distort, extrude or strike the storage card, otherwise
the audio-video material recorded on it may be damaged.