Instructions

 The headphone must be powered off before you begin to initiate
the paring.
 Press and hold the multi-function button for 3 seconds until the
BLUE and RED LED flash alternatively. The headphone is now in
paring mode. Note: always the main headphone is the one which is
paired to your mobile phone and has the right hand channel.
 Activate the Bluetooth feature on the phone, and set the phone to
search for Bluetooth devices. Check the user guide of your phone
for instructions.
 Select the In-Ear piece „MusicMan BT-X49“ from the list of found
devices. When you open the Bluetooth function on mobile phone,
you will find two MusicMan BT-X49 on the list of found devices. After
a while, it will be one only, then choose MusicMan BT-X49 and
connect it with Bluetooth mobile phone.
 When asked the PIN code, please enter “0000” to pair the
headphone to your phone. In some phones you may need to make
the connection separately after pairing. See the user guide of your
phone for details.
 If the pairing is successful, the headphone enters idle state and
BLUE LED will flash 1 time every 5 seconds. Connect the
headphone and mobile phone, and you will hear “pairing successful,
connected”. The headphone’s name appears in the phone menu
where you can view the currently paired Bluetooth devices.
 If no Bluetooth connection is made within 5 minutes, the
headphone will turn off automatically.
Auto reconnection
When the two MusicMan BT-X49 are in off state, switch them on at
the same time or one after the other, they will reconnect
automatically. And the main headphone will reconnect to the paired
mobile phone automatically too.