Instructions

ManualsBrandsTechnaxx ManualsBuilding Technology & Smart LivingTechnaxx 4826 Mini CCTV camera

Technaxx

* User Manual

Mini FullHD Cam TX-136

The Declaration of Conformity for this device is under the Internet link:

www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the

device the first time, please read the user manual carefully.

Service phone No. for technical support: 01805 012643 (14 cent/minute from

German fixed-line and 42 cent/minute from mobile networks).

Free Email: support@technaxx.de

This device has a rechargeable battery. It must be fully charged before

first use. NOTE: Charge the battery of the device every 2–3 month if it is

not used!

Keep this user manual for future reference or product sharing carefully. Do

the same with the original accessories for this product. In case of warranty,

please contact the dealer or the store where you bought this product.

Warranty 2 years

Enjoy your product. Share your experience and opinion on one of the

well-known internet portals.

Features

 Very small FullHD camera with 1MP CMOS sensor, clip, magnet

& wall holder (allow mounting on many surfaces)  Built-in magnet

allows mounting on many metal surfaces  Night vision with 6

invisible infrared LEDs  Supports cycle recording (once the

memory is full, the oldest video files will be overwritten to store the

newest video files)  Motion detection (~3m)  Storage of files on

MicroSD* card up to 32GB class 10 (*not included)  3 modes:

video recording (1080p, 720p), automatic photo shoot by interval

(5–60 seconds), motion detection  2 video resolutions: FullHD

(1920x1080P) or HD (1280x720p) at 30fps  Powered by

rechargeable 300mAh battery for ~90 minutes of video recording

 Actioncam and spycam in one device

Summary of content (7 pages)

PAGE 1
Technaxx® * User Manual Mini FullHD Cam TX-136 The Declaration of Conformity for this device is under the Internet link: www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the device the first time, please read the user manual carefully. Service phone No. for technical support: 01805 012643 (14 cent/minute from German fixed-line and 42 cent/minute from mobile networks). Free Email: support@technaxx.de This device has a rechargeable battery. It must be fully charged before first use.
PAGE 2
Technical specifications Sensor / Viewing angle 1/3" CMOS 1MP (H62) / 120° 1920x1080 (interpolated), 30fps Video resolution 1280x720, 30fps Video (loop recording), Automatic photo Modes (5–60 seconds), Motion detection Photo format JPEG, 10MP (3648x2736) Video format AVI, MJPG (compression) Video length max. 5 minutes (new file every 5 min.) Recording time ~90 min. (day) or ~45 min.
PAGE 3
Product view 1 2 3 4 Mode (M button) Indicator light (LED) ON / OFF Micro USB 5 6 7 8 Microphone Camera lens Infrared LEDs (6x) MicroSD card slot NOTE: TX-136 is not waterproof! The ON/OFF button up is the right direction for recording! Getting started Connect the camera with the included Micro USB cable to the PC or to an USB adapter* (DC 5V/1A *not included) or a mobile device like a power bank. The charging indicator flashes RED when camera is OFF. This indicates that the camera is charging.
PAGE 4
Note: The camera is not equipped with built-in memory. Insert a preformatted memory card before use. Format MicroSD card with max. 32GB to FAT32. Normally MicroSD cards are formatted when you buy them. Long press (2 seconds) the ON/OFF button, the indicator light turns BLUE. Device is turned on and waits for mode to be chosen. To turn off: Long press the ON/OFF button for 5 seconds the indicator light turns off. The device is powered off.
PAGE 5
Connect the camera with the Micro USB cable with the USB port to your PC (if necessary press the ON/OFF button). Or remove the MicroSD from the camera and attach it to your PC (if necessary use SD card adapter). Open the MicroSD path on your PC when it does not open automatically. Double click the time.txt file. It opens with the standard Editor. Change the date & time.
PAGE 6
The device goes into standby mode. In standby, press ON/OFF once, the BLUE light flashes for 3 times and then turns off. The device starts recording. Video files are saved every 5 minutes. The video file will be saved sequentially until the memory is full. When the memory is full the loop function will delete the oldest file and saves the newest. Press the button ON/OFF once to stop recording and return to the standby mode. The BLUE light is on.
PAGE 7
Video files will save a video every 5 minutes. The video file will be saved sequentially until the memory is full. When the memory is full the loop function will delete the oldest file and saves the newest. To change the mode press the M button. To power off the device hold and press ON/OFF button for 5 seconds. Night vision LEDs The infrared night vision light turns automatically on in dark environment. Check the file on the computer Connect the Micro USB cable** (**included) to the computer and device.