Manual

13
Model: TX-178 Article No. 4973, 01/2022
FM
Choose FM mode from the main menu and
confirm with Enter. FM radio mode receives
analogue radio from the FM band.
For better reception, remove the telescopic
antenna (14) from the holder on the back of the
device and pull it out completely.
Let the system scan for ALL station by pressing ENTER on the device or
remote or press and hold SCAN (5) on the remote control. Confirm with
Yes if you want to auto scan for FM stations by pressing Enter (12) or Enter
(15) on the remote. The searched stations will automatically be stored in
preset station list. To switch between the stored stations press the /
buttons.
Alternatively, you can set the FM radio stations manually. Press or
button on the device or using the or button of remote control to search
FM station. Each step moves 0.05MHz.
It is faster to find a FM radio station by pressing and holding or button
on the device or using the or button of remote control to auto search
the next FM station or just press SCAN (5) on the remote control. The
frequency display starts to run up as TX-178 scans the FM band. It stops
when it has received a station. You may press or on device or remote
control to tune station manually.
Press and hold the PRESET (4) button on the remote control or the
MEMORY (8) button on the device to save the station.
You can save up to 20 station. Press PRESET, then press or on the
remote control or press MEMORY button on the device to recall the saved
station. Rotate the Knob (12) to choose the desired radio station.
In the Preset list you can change the order of the saved FM radio stations.
Use the on device or remote control to Shift up or down the position.