Operation Manual

8.7. Setting Mode
Press Menu key to display the main menu.
Press LEFT or RIGHT navigation key to select the “Setting”.
Press OK key to enter it.
Then below settings are shown:
Setting
Press UP or Down navigation
key to select “Pair” and press
OK key to confirm the
selection.
With the LEFT or RIGHT
navigation key
you can select
Cameras.
Pair
Select CAM1 and press OK
key to pair with the camera. If
succeed, you will see this
picture.
With CAM2, CAM3, CAM4
paring procedure is the same.
Select Exit with the UP/DOWN
navigation key to go back to
the Main Menu.
Date & Time
Press UP or Down navigation
key to select “Date & Time”
and press OK key to confirm
the selection.
With the LEFT or RIGHT
navigation key you can select
ON or OFF.
Select Exit with the UP/DOWN
navigation key to go back to
the Main Menu.