Instructions / Assembly

P.6
RTA-0054
P.6
STEP 4
Hardware/tools:
❼
2
Pcs
(NOT INCLUDED)
Assemble one of the handles Ⓢ to the front panel using screws ⑦ from the inside as
shown.
(This shows the drawer from behind
with its front facing to the left)
K5
(Front)
STEP 5
Hardware/tools:
4
Pcs
(NOT INCLUDED)
13
Assemble the back panel to the side panels and using screws as shown.
L3
13
L2
L1
(The large groove is on the
exterior surface in the middle of
the side panels)
(Front)
(The small groove is on the
interior surface at the bottom
on all panels)
STEP 6
L4
L1
L2 L3
Slide the bottom panel thru the grooves of all panels , , and .
(Front)
(This view is from the front facing to the left)