Installation Manual

RTA-1460P.6
1
2
3
4
STEP S
1
C
C
E
C
C
E
2
Left
15
15
Right
15
Right
Right
Left
Left
15
E
E
4
C
5
4
D
A
Instructions on page 4
Attention:Do not tighten the screws until all of them are in right positions
WARNING:HOLES ON PANELS MAY BE HIDDEN UNDERNEATH PVC LAMINATE!!!
Assemble one of the flat sliders (15) to the left
structure (1) using 3 screws (E), with the wheel facing
to the front. Then screw 2 bolts (C) on the back
of the structure as shown.
Assemble one of the flat sliders (15) to the right
structure (2) using 3 screws (E), with the wheel facing
to the front. Then screw 2 bolts (C) on the back
of the structure as shown.
Assemble the other 2 flat sliders (15) to both faces
and to the bottom of the central panel (4) using screws
(E), with the wheels facing to the front.
Place the main panel
(5) upside-down with
its front edge facing
towards you. Screw 8
bolts (C) into the places
shown. Insert 2 wooden pins
(A) as shown. Assemble
panel (4) to the main
panel (5) using cam locks
(D), make sure the wheels are facing to the front.