Installation Manual

RTA-1460P.9
10
11
12
13
STEPS
11
10
G
6
F
16
H
D
D
7
9
G
G
Instructions on page 4
F
C
C
F
Instructions on page 4
D
16
H
14
12
D
D
C
C
F
F
Assemble the panel (11) to the panel (8) using screw
(G) as shown. Make sure the hole for the cam lock on
panel (11) is facing outwards. Then slide the panel (10)
in between the panels, making sure it enters into all the
channels.
Screw bolts (C) to panel (6)
and insert wooden pins (F)
as shown.
Then assemble panel (6)
using cam locks (D) as
shown. Finally, assemble the
handle (16) using screws (H).
Assemble the panel (13) in between the other panel (7)
and the other panel (9) using screws (G) as shown.
The channel on all panels will be at the bottom and
facing towards the inside.
13
Then assemble panel (12)
using cam locks (D) as
shown. Finally, assemble the
handle (16) using screws (H).
Screw bolts (C) to panel (12)
and insert wooden pins (F)
as shown.