MODEL RTA - 3520 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference. Complete video assembly demonstration is available at: www.rtaproducts.com/assembly-videos.
RTA-3520 DIMENSIONS Product Size: 47.
RTA-3520 P.
RTA-3520 P.4 17 X3 Drawer Left Panel 21 18 19 X3 X3 Drawer Right Panel X 3SET X3 Drawer Back Panel Drawer Front Panel 22 Left Right Left Right 20 X3 Drawer Bottom Panel 23 Handle Drawer Slider X3 SCREWS LIST PART QTY. ITEM PART QTY.
RTA-3520 P.
RTA-3520 P.
RTA-3520 ASSEMBLY STEPS: 1 P.7 Complete video assembly demonstration is available at: www.rtaproducts.com/assembly-videos.htm 2 1 SCREWS A 3X15 MM 22 3PCS 12PCS 22 3PCS Right Left Grab all the flat shaped Drawer Sliders (22) and set aside the “L” shaped ones. With the Left & Middle Panels (1&2) oriented as illustrated, assemble the flat sliders (22) to the holes on their inside faces. The wheels will be located at the front and facing down.
RTA-3520 P.8 4 2 Detailed instructions on PAGE 5 Screw the Bolts (B) to the corresponding holes on the inside face of Middle Panel (2), then assemble the Middle Panel (2) to the Horizontal Panel (5), Bottom Panel (6) and Front Base Panel (8) by turning all the corresponding cam locks. 6 5 8 SCREWS B 6X40 MM 5PCS 5 4 Screw the Bolts (B) to the corresponding holes on the inside face of Top Panel (4), then assemble it to the cabinet by turning the corresponding cam locks.
RTA-3520 P.9 8 E 11 D 2 SCREWS D 6X35 MM 9 2PCS E 6X25 MM Use Screws (D & E) to assemble the Back Structure (11) between the Middle Panel (2) and Side Structure (9). 9 2PCS 14 4PCS 10 14 4PCS 15 Right 15 Left 12 Use Screws (F) to affix the Slider Bases (14) to the Main Panel (12). Use Screws (G) to fix the Keyboard Slider (15) to the Slider Bases (14) as illustrated. Please note the position of the tabs on the sliders.
RTA-3520 P.10 Place the plastic washer (L) in between the Top Panel (4) and Support Tubes (16), and assemble the Main Panel (12) using screws (D) on the LEFT and (I) on the RIGHT. 12 12 9 SCREWS 4 L I 6X60 MM 2PCS I D 2PCS I D D 6X35 MM 2PCS 13 13 Use Screws (H) to assemble the Keyboard Panel (13) to the Keyboard Slider (15).
RTA-3520 P.11 16 Assemble the Drawer Back Panel (21) between the Drawer Left & Right Panels (17&18) using Screws (J) as shown. 21 18 SCREWS 17 J 4X35 MM 4PCS 17 22 22 SCREWS Place the drawer upside-down. Grab the “L” shaped sliders (22) and assemble them to the drawer using Screws (A), with wheels facing towards the back of the drawer. Make sure the sliders are touching the side panels, and that they are not “up in the air”.
