Instructions / Assembly

P. 6
RTA-3805L
P. 6
With the help of another person, carefully place the glass tops over the
frame, and assemble:
- The corner glass E to the corner structure D with screws L from
underneath, through the frame and into the round metal discs.
- The Main glasses F to the bars C with screws K from underneath,
through the frame and into the round metal discs.
STEP 5
Hardware:
K
M6x23
8
Pcs
L
M6x8
4
Pcs
M
Please note that the glasses won’t necessarily align perfectly, and might
look little uneven or with small gaps. This is considered normal, but if the
gap or misalignment is by more than a quarter of an inch (8mm), you can
try improving the leveling and close the gaps as much as possible by
adjusting the frame and the glide studs. Once the adjustments have
been done, you can proceed to tighten all the screws used from step 2
through step 5.
STEP 6
Hardware:
M
E
Do not tighten any screws in this step, leave them all loose.
F
KL
F
K
K
K
K
K
L
L
K
Adjusting the innermost
glide studs might help
leveling the glasses.