MODELS: RTA-3930SU, RT A-3940SU ASSEMBLY INSTRUCTIONS Thank you for purchasing our product. RIA PAOOUCTB•LLC REV.
RTA-3930SU, RTA-3940SU • Please read carefully the assembly instructions before the installation. • Do not discard this manual or any of the packaging material until the unit has been completely assembled. • tt Might require two people.
P.
mDErl ITEM 12 M6x16 IDa B 4 M8x50 @all 1 - ■mDEDI LIST OF SCREWS AND TOOLS A C - RTA-3930SU, RTA-3940SU 4x4(qty.1) 5x5(qty.1) D 1 2.5x2.5 E 4 M4x6 4x4 5x5 - ==rn rn =;ii Ot ITEM 15 ST4.2x19 1 Wrench � NOTE: You will need for the assembly a Phillips screwdriver which is not included with the product.
P.4 RTA-3930SU, RTA-3940SU P.4 BEFORE YOU START THE ASSEMBLY, PLEASE READ THE FOLLOWING TIPS AND WARNINGS. 0 Do a quick inventory to make sure the package contains all the parts and hardware listed in the assembly instructions. 8 Missing, damaged and defective parts can be replaced at no cost to you. Please refer to the last pages on this manual. 8 The replacement parts service is limited to the continental United States. If you reside in Alaska, Hawaii, Puerto Rico, U.S.
RTA-3930SU, RTA-3940SU Ma m 0c 2 x.
RTA-3930SU, RTA-3940SU With the help of another person, place the frame (legs and beam) over the tabletop 12, and slide the metal holder 11 under the beam 4. •I• tt e Then assemble the legs 2 and 3 to the support plates 6 with screws A from the side, and the beam 4 with screws F through the beam's tabs. Note: There are no pre-drilled holes on the tabletop, just screw directly into the wood. Then Tighten the screws on the support beam 4.
RTA-3930SU, RTA-3940SU P.7 Use the wrench G to loosen up the nut on the transmission rod 5, then with the help of another person, attach the end with the plastic gear into the receiver of the motor on the leg 3, and the other end into the hole of the leg 2. IMPORTANT: Make sure that on the plastic gear the small screw is visible and facing up. tt -- This end goes into the leg 2. This end attaches - to the motor on leg with motor 3.
P.8 P.8 I RTA-3930SU, RTA-3940SU STEP 5 It is important to do a lift test before proceeding. Connect the following pieces: • The motor cable 3, switch cord 14 and handset cable 13 to the control box 15 in the respectives ports as shown. • The switch cord 14 and the power cable 9 to the power adapter 7 as shown. • The power cable 9 to a power outlet 110-240V. Please check first if the electrical voltage for the power outlet you intend to use is suitable before connecting. � ..
P.9 RTA-3930SU, RTA-3940SU STEP6 Insert the power adapter 7 into the holder 11. Then attach the covers 8 - to the beam 4 with screws E. Then secure all the devices and cables as follows: D Pc • The handset 13 to the edge of the tabletop 12 with screws F on the same side where the leg with motor is located. 4 • The control box 15 to the tabletop 12 with screws F near the E Pcs M4x6 frame on the same side where the leg with motor is located.
RTA-3930SU, RTA-3940SU I P.10 I Use the keys C to assemble the feet 1 to the legs 2 and 3 with screws A as shown. tt STEPS With the help of another person, carefully turn the unit over and re connect to the power supply.
1 P.11 RTA-3930SU, RTA-3940SU � ALL DONE! Give yourself a nice pat on the back. You did a great job! I P.
I P.12 I RTA-3930SU, RTA-3940SU AFTER THE ASSEMBLY IS DONE, PLEASE READ CAREFULLY THE FOLLOWING CARE AND MAINTENANCE WARNINGS: WEIGHT LIMIT • • • TECHNICAL DATA Max. lift speed 59 in/min (25mm/s) Input voltage 100-240V Duty cycle (power cycle) 10%: 2 min on at most, 18 min off. Tolerable ambient temperature 32-104F (0-40 ° C) • Do not exceed the indicated weight limit. • Do not expose the surfaces to direct sunlight or to extreme environmental conditions.
RTA-3930SU, RTA-3940SU TECHNI MOBILI WARRANTY DESKS/LAPTOP CARTS/FILE CABINETS: LIMITED 5-YEAR WARRANTY TV Stand/Entertainment Center: 2 YEAR WARRANTY RTA Products, LLC warrants to the Original Purchaser who acquired a new product from RTA Products or its authorized resellers that this product will be free from defects in its workmanship and materials, under normal use and service conditions, as described herein.
I P.14 I RTA-3930SU, RTA-3940SU FOR SEVERAL HELP OPTIONS INCLUDING REPLACEMENT PARTS ORDERS v1s1r: WWW.TECHNIMOBILI.COM <,� CLICK ON SUPPORT TAB Scan QR Code to order replacement parts OR EMAIL US: SUPPORT@RTAPRODUCTS.
