Instructions / Assembly

Important: Make sure you use in this step the correct sliders 4
which are black, longer, and have more holes than sliders 22.
• Attach the sliders 4 to the top sets of holes on panels 9 and 10 with
screws B, starting with the front holes first by opening the sliders
slowly until you see the first hole through the big opening; then open
the sliders completely and attach on the 2 back holes.
Attach the glide studs 15
to the underside face of
the panels 13 and 20 (the
side with only 4 holes).
STEP 5
Hardware:
B
ST3x15
6
Pcs
Scan QR Code
to view this step
STEP 6
Hardware:
15
8
Pcs
Scan QR Code
to view this step
9
((TTop)op)
(F(Froronntt))
(F(Froronntt))
((Front))
P. 8
RTA-8211
P. 8
10
STEP 7
Hardware:
A
M6x40
4
Pcs
Scan QR Code
to view this step
9
10
13
Assemble the side panels
9 and 10 to the bottom
panel 13 with bolts A as
explained in page 4.
The back of
panel 13 will
have 2 free
holes for next
step
Front hole first: Find front hole through big opening
Back holes after: Open sliders completely
Front hole first
Back holes after
4
4
9
10
(F(Froronntt))
(Front) (Front)
((TTop)op)
((TTop)op)
((TTop)op)
Cam lock
alignment
13
20
BLACK SLIDERS!