MODEL RTA - 8338 Thanks for purchasing one of our products. Please read carefully the assembly instructions before the installation. Please save this manual for future reference.
RTA-8338 DIMENSIONS Product Size: 44"W x 24"D x 30"H MAXIMUM WEIGHT CAPACITIES DO NOT exceed this limit Please use care and good judgement when placing objects on wood surface
P.
P.5 Use Screws (A) to assemble the Side Panels (5) to the Main Structures (1). Insert the Studs (4) to the Main Structures (1). Use Screws (B) to assemble the Horizontal Tube (6) between the Main Structures (1).
P.6 Use Screws (C) to assemble the Back Panel (2) between the Main Structures (1). Use Screws (D) to assemble the Main Panel (7) to the Main Structures (1).
P.7 Use Screws (D) to assemble the CPU Side Panel (8) to the CPU Panel (9). Use Screws (D) to assemble the CPU Tube (10) to the CPU Side Panel (8). Fix the Casters (3) to the CPU Panel (9). Make sure to install the ones that have the stop at the front.
CARE AND MAINTENANCE English - DO NOT EXPOSE THE SURFACES TO DIRECT SUNLIGHT, OR EXTREME ENVIRONMENTAL CONDITIONS. EXPOSURE WILL DAMAGE THE PRODUCT, WHICH IS NOT COVERED BY THE WARRANTY. - DO NOT USE SOLVENTS OVER SURFACES OR STRUCTURAL TUBES. SURFACES MUST BE CLEANED WITH A SOLUTION OF A SMOOTH SOAP AND WATER, THEN CLEARED WITH A DRY TOWEL. - PRODUCTS THAT ARE HEAVY SHOULD BE LIFTED OR MOVED BY AT LEAST 2 PERSONS, AND ALL OBJECTS SHOULD BE REMOVED FROM THE PRODUCT.