Instructions / Assembly

P.10

RTA-8409

P.10

Insert and secure the corner brackets (12) on the 2 back corners of the unit using screws

(13) as shown.

First insert and align the cam

locks (2) into the drawer side

panels (O) and (P), and then

assemble them to the drawer

front panel (N) as shown and as

explained in page 4. Then slide

the drawer bottom panel (R) thru the groves of the 3

panels as shown.

Assemble the drawer back panel

(Q) to the drawer side panels (P)

and (O) using screws (4) as

shown.

STEP 16

Hardware:

C. Bracket

M3x16

(Drawer shown

from its underside

with its front panel

facing down)

(Same parts as step 15,

but shown from behind)

STEP 17

Hardware:

15mm

STEP 18

Hardware:

M4x38mm