Instructions / Assembly

- First install the hinges (15) to the door (P) using screws (5), then install the handle (14) using

its own screws. Make sure the handle is installed on the outside of the panel.

- Place the drawer upside-down and

assemble the “L” shaped sliders to the bottom

using screws (7) as shown.

Please note that the wheels go towards the

back of the drawer and the sliders should not

protrude from the bottom, otherwise the

drawers raise 3/4” and will not fit in the unit.

- First install the handle (13) to the drawer

front panel (Q) using the own handle screws,

then install the cam locks caps (10) as

shown.

10 13