Instructions / Assembly

3
With the help of another person, bring the sections assembled in steps 10 and 14 upright
and place them oriented as shown. Then assemble panel H to panel G using screws 9.
Then slide the panel V through the grooves of C and D, and W through the grooves of E
and F. Finally, install the metal pins 12 in the desired sets of holes on panels C and D,
and place the panel O over the pins as shown.
RTA-8412L
P.13P.13
STEP 15
Hardware/Tools:
9
3
Pcs
(NOT INCLUDED)
12
4
Pcs
With the help of another person, place the main panels A and B over the frame, then insert the
cam locks into panels C, D, E, F, G and H, making sure they go in the aligned position, and
turn them to lock the pieces. After the assembly is done, cover the cam locks with caps 10.
STEP 16
Hardware/Tools:
10
Pcs
10
10
Pcs
A
B
3
10
C
D
E
F
After assembly
ST5 x 40
(NOT INCLUDED)
G
H
Alignment
Direction
H
G
O
F
W
E
V
C
D
12
9
This illustration shows the
parts assembled in step
10 and 14 in normal
upright position.