Instructions / Assembly

For each set of slider 20, Separate the pieces according to their shape:
- The Flat shaped will be used in the next step (2 pieces, both left and right).
- The "L
" shaped will be used until step 21 (2 pieces, left and right).
RTA-8412L
P.8P.8
STEP 5
Install the flat shaped sliders 20 on panels E and F with screws 4 as shown. For better
results, attach first at the front, then at the back.
STEP 6
Hardware/Tools:
4
8
Pcs
20
4
Pcs
Flat Shaped
"L" Shaped
Hardware/Tools:
20
2
Sets
Flat - Right
L - Shape - Right
Flat - Left
L - Shape - Left
ST5 x 8
(NOT INCLUDED)
E
(Top)
(Front)
F
(Top)
(Front)
The wheel
goes towards
the front and
facing down.
Attach using these holes, do the front first